diff --git a/Makefile b/Makefile
index 170e1276b2..214da95c30 100644
--- a/Makefile
+++ b/Makefile
@@ -12,15 +12,15 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-.PHONY: ceph bootstrap mariadb etcd keystone memcached rabbitmq helm-toolkit mistral neutron nova cinder heat ingress all clean
+.PHONY: ceph bootstrap mariadb etcd keystone memcached rabbitmq helm-toolkit mistral neutron nova cinder heat senlin ingress all clean
 
 B64_DIRS := helm-toolkit/secrets
 B64_EXCLUDE := $(wildcard helm-toolkit/secrets/*.b64)
 
-CHARTS := ceph mariadb etcd rabbitmq memcached keystone glance horizon mistral neutron nova cinder heat ingress
+CHARTS := ceph mariadb etcd rabbitmq memcached keystone glance horizon mistral neutron nova cinder heat senlin ingress
 TOOLKIT_TPL := helm-toolkit/templates/_globals.tpl
 
-all: helm-toolkit ceph bootstrap mariadb etcd rabbitmq memcached keystone glance horizon mistral neutron nova cinder heat ingress
+all: helm-toolkit ceph bootstrap mariadb etcd rabbitmq memcached keystone glance horizon mistral neutron nova cinder heat senlin ingress
 
 helm-toolkit: build-helm-toolkit
 
@@ -51,6 +51,8 @@ nova: build-nova
 
 heat: build-heat
 
+senlin: build-senlin
+
 memcached: build-memcached
 
 ingress: build-ingress
diff --git a/senlin/Chart.yaml b/senlin/Chart.yaml
new file mode 100644
index 0000000000..f7e4d7111f
--- /dev/null
+++ b/senlin/Chart.yaml
@@ -0,0 +1,24 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: OpenStack-Helm Senlin
+name: senlin
+version: 0.1.0
+home: https://docs.openstack.org/developer/senlin
+sources:
+  - https://git.openstack.org/cgit/openstack/senlin
+  - https://git.openstack.org/cgit/openstack/openstack-helm
+maintainers:
+  - name: OpenStack-Helm Authors
diff --git a/senlin/requirements.yaml b/senlin/requirements.yaml
new file mode 100644
index 0000000000..53782e69b2
--- /dev/null
+++ b/senlin/requirements.yaml
@@ -0,0 +1,18 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: helm-toolkit
+    repository: http://localhost:8879/charts
+    version: 0.1.0
diff --git a/senlin/templates/bin/_db-sync.sh.tpl b/senlin/templates/bin/_db-sync.sh.tpl
new file mode 100644
index 0000000000..9f03b7443c
--- /dev/null
+++ b/senlin/templates/bin/_db-sync.sh.tpl
@@ -0,0 +1,19 @@
+#!/bin/bash
+
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -ex
+
+senlin-manage db_sync
diff --git a/senlin/templates/bin/_senlin-api.sh.tpl b/senlin/templates/bin/_senlin-api.sh.tpl
new file mode 100644
index 0000000000..cd61cc0148
--- /dev/null
+++ b/senlin/templates/bin/_senlin-api.sh.tpl
@@ -0,0 +1,19 @@
+#!/bin/bash
+
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -x
+exec senlin-api \
+      --config-file /etc/senlin/senlin.conf
diff --git a/senlin/templates/bin/_senlin-engine.sh.tpl b/senlin/templates/bin/_senlin-engine.sh.tpl
new file mode 100644
index 0000000000..74e12d1add
--- /dev/null
+++ b/senlin/templates/bin/_senlin-engine.sh.tpl
@@ -0,0 +1,19 @@
+#!/bin/bash
+
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -x
+exec senlin-engine \
+      --config-file /etc/senlin/senlin.conf
diff --git a/senlin/templates/configmap-bin.yaml b/senlin/templates/configmap-bin.yaml
new file mode 100644
index 0000000000..1e542140cd
--- /dev/null
+++ b/senlin/templates/configmap-bin.yaml
@@ -0,0 +1,35 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: senlin-bin
+data:
+  db-init.py: |
+{{- include "helm-toolkit.db_init" . | indent 4 }}
+  db-sync.sh: |
+{{ tuple "bin/_db-sync.sh.tpl" . | include "helm-toolkit.template" | indent 4 }}
+  ks-service.sh: |+
+{{- include "helm-toolkit.keystone_service" . | indent 4 }}
+  ks-endpoints.sh: |+
+{{- include "helm-toolkit.keystone_endpoints" . | indent 4 }}
+  ks-user.sh: |+
+{{- include "helm-toolkit.keystone_user" . | indent 4 }}
+  ks-domain-user.sh: |+
+{{- include "helm-toolkit.keystone_domain_user" . | indent 4 }}
+  senlin-api.sh: |
+{{ tuple "bin/_senlin-api.sh.tpl" . | include "helm-toolkit.template" | indent 4 }}
+  senlin-engine.sh: |
+{{ tuple "bin/_senlin-engine.sh.tpl" . | include "helm-toolkit.template" | indent 4 }}
diff --git a/senlin/templates/configmap-etc.yaml b/senlin/templates/configmap-etc.yaml
new file mode 100644
index 0000000000..44e62b0c62
--- /dev/null
+++ b/senlin/templates/configmap-etc.yaml
@@ -0,0 +1,72 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{{- include "senlin.conf.senlin_values_skeleton" .Values.conf.senlin | trunc 0 -}}
+
+{{- if empty .Values.conf.senlin.keystone_authtoken.keystonemiddleware.auth_token.auth_uri -}}
+{{- tuple "identity" "internal" "api" . | include "helm-toolkit.keystone_endpoint_uri_lookup"| set .Values.conf.senlin.keystone_authtoken.keystonemiddleware.auth_token "auth_uri" | quote | trunc 0 -}}
+{{- end -}}
+
+# FIXME(alanmeadows) fix for broken keystonemiddleware oslo config gen in newton - will remove in future
+{{- if empty .Values.conf.senlin.keystone_authtoken.keystonemiddleware.auth_token.auth_url -}}
+{{- tuple "identity" "internal" "api" . | include "helm-toolkit.keystone_endpoint_uri_lookup"| set .Values.conf.senlin.keystone_authtoken.keystonemiddleware.auth_token "auth_url" | quote | trunc 0 -}}
+{{- end -}}
+
+{{- if empty .Values.conf.senlin.keystone_authtoken.keystonemiddleware.auth_token.memcached_servers -}}
+{{- tuple "oslo_cache" "internal" "memcache" . | include "helm-toolkit.hostname_endpoint_uri_lookup" | set .Values.conf.senlin.keystone_authtoken.keystonemiddleware.auth_token "memcached_servers" | quote | trunc 0 -}}
+{{- end -}}
+
+{{- if empty .Values.conf.senlin.database.oslo.db.connection -}}
+{{- tuple "oslo_db" "internal" "user" "mysql" . | include "helm-toolkit.authenticated_endpoint_uri_lookup"| set .Values.conf.senlin.database.oslo.db "connection" | quote | trunc 0 -}}
+{{- end -}}
+
+{{- if empty .Values.conf.senlin.default.oslo.messaging.transport_url -}}
+{{- tuple "oslo_messaging" "internal" "user" "amqp" . | include "helm-toolkit.authenticated_endpoint_uri_lookup" | set .Values.conf.senlin.default.oslo.messaging "transport_url" | quote | trunc 0 -}}
+{{- end -}}
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: senlin-etc
+data:
+  senlin.conf: |+
+{{ if .Values.conf.senlin.override -}}
+{{ .Values.conf.senlin.override | indent 4 }}
+{{- else -}}
+{{- if .Values.conf.senlin.prefix -}}
+{{ .Values.conf.senlin.prefix | indent 4 }}
+{{- end }}
+{{ tuple "etc/_senlin.conf.tpl" . | include "helm-toolkit.template" | indent 4 }}
+{{- end }}
+{{- if .Values.conf.senlin.append -}}
+{{ .Values.conf.senlin.append | indent 4 }}
+{{- end }}
+  api-paste.ini: |+
+{{ if .Values.conf.paste.override -}}
+{{ .Values.conf.paste.override | indent 4 }}
+{{- else -}}
+{{- if .Values.conf.paste.prefix -}}
+{{ .Values.conf.paste.prefix | indent 4 }}
+{{- end }}
+{{ tuple "etc/_api-paste.ini.tpl" . | include "helm-toolkit.template" | indent 4 }}
+{{- end }}
+{{- if .Values.conf.paste.append -}}
+{{ .Values.conf.paste.append | indent 4 }}
+{{- end }}
+  policy.json: |+
+{{ if .Values.conf.policy.override -}}
+{{ .Values.conf.policy.override | indent 4 }}
+{{- else -}}
+{{ tuple "etc/_policy.json.tpl" . | include "helm-toolkit.template" | indent 4 }}
+{{- end }}
diff --git a/senlin/templates/deployment-api.yaml b/senlin/templates/deployment-api.yaml
new file mode 100644
index 0000000000..3267084569
--- /dev/null
+++ b/senlin/templates/deployment-api.yaml
@@ -0,0 +1,98 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{{- $envAll := . }}
+{{- $dependencies := .Values.dependencies.api }}
+{{- $mounts_senlin_api := .Values.mounts.senlin_api.senlin_api }}
+{{- $mounts_senlin_api_init := .Values.mounts.senlin_api.init_container }}
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: senlin-api
+spec:
+  replicas: {{ .Values.replicas.api }}
+  revisionHistoryLimit: {{ .Values.upgrades.revision_history }}
+  strategy:
+    type: {{ .Values.upgrades.pod_replacement_strategy }}
+    {{ if eq .Values.upgrades.pod_replacement_strategy "RollingUpdate" }}
+    rollingUpdate:
+      maxUnavailable: {{ .Values.upgrades.rolling_update.max_unavailable }}
+      maxSurge: {{ .Values.upgrades.rolling_update.max_surge }}
+    {{ end }}
+  template:
+    metadata:
+      labels:
+        app: senlin-api
+      annotations:
+        pod.beta.kubernetes.io/init-containers: '[
+{{ tuple $envAll $dependencies $mounts_senlin_api_init | include "helm-toolkit.kubernetes_entrypoint_init_container" | indent 10 }}
+        ]'
+    spec:
+      nodeSelector:
+        {{ .Values.labels.node_selector_key }}: {{ .Values.labels.node_selector_value }}
+      containers:
+        - name: senlin-api
+          image: {{ .Values.images.api }}
+          imagePullPolicy: {{ .Values.images.pull_policy }}
+          {{- if .Values.resources.enabled }}
+          resources:
+            requests:
+              memory: {{ .Values.resources.senlin_api.requests.memory | quote }}
+              cpu: {{ .Values.resources.senlin_api.requests.cpu | quote }}
+            limits:
+              memory: {{ .Values.resources.senlin_api.limits.memory | quote }}
+              cpu: {{ .Values.resources.senlin_api.limits.cpu | quote }}
+          {{- end }}
+          ports:
+            - containerPort: {{ .Values.conf.senlin.senlin_api.senlin.config.bind_port }}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.conf.senlin.senlin_api.senlin.config.bind_port }}
+          command:
+            - bash
+            - /tmp/senlin-api.sh
+          volumeMounts:
+            - name: senlin-bin
+              mountPath: /tmp/senlin-api.sh
+              subPath: senlin-api.sh
+              readOnly: true
+            - name: pod-etc-senlin
+              mountPath: /etc/senlin
+            - name: pod-var-cache-senlin
+              mountPath: /var/cache/senlin
+            - name: senlin-etc
+              mountPath: /etc/senlin/senlin.conf
+              subPath: senlin.conf
+              readOnly: true
+            - name: senlin-etc
+              mountPath: /etc/senlin/api-paste.ini
+              subPath: api-paste.ini
+              readOnly: true
+            - name: senlin-etc
+              mountPath: /etc/senlin/policy.json
+              subPath: policy.json
+              readOnly: true
+{{ if $mounts_senlin_api.volumeMounts }}{{ toYaml $mounts_senlin_api.volumeMounts | indent 12 }}{{ end }}
+      volumes:
+        - name: pod-etc-senlin
+          emptyDir: {}
+        - name: pod-var-cache-senlin
+          emptyDir: {}
+        - name: senlin-bin
+          configMap:
+            name: senlin-bin
+        - name: senlin-etc
+          configMap:
+            name: senlin-etc
+{{ if $mounts_senlin_api.volumes }}{{ toYaml $mounts_senlin_api.volumes | indent 8 }}{{ end }}
diff --git a/senlin/templates/etc/_api-paste.ini.tpl b/senlin/templates/etc/_api-paste.ini.tpl
new file mode 100644
index 0000000000..8bc81a15c2
--- /dev/null
+++ b/senlin/templates/etc/_api-paste.ini.tpl
@@ -0,0 +1,38 @@
+# senlin-api pipeline
+[pipeline:senlin-api]
+pipeline = request_id faultwrap ssl versionnegotiation webhook authtoken context trust apiv1app
+
+[app:apiv1app]
+paste.app_factory = senlin.api.common.wsgi:app_factory
+senlin.app_factory = senlin.api.openstack.v1.router:API
+
+# Middleware to set x-openstack-request-id in http response header
+[filter:request_id]
+paste.filter_factory = oslo_middleware.request_id:RequestId.factory
+
+[filter:faultwrap]
+paste.filter_factory = senlin.api.common.wsgi:filter_factory
+senlin.filter_factory = senlin.api.middleware:fault_filter
+
+[filter:context]
+paste.filter_factory = senlin.api.common.wsgi:filter_factory
+senlin.filter_factory = senlin.api.middleware:context_filter
+
+[filter:ssl]
+paste.filter_factory = oslo_middleware.ssl:SSLMiddleware.factory
+
+[filter:versionnegotiation]
+paste.filter_factory = senlin.api.common.wsgi:filter_factory
+senlin.filter_factory = senlin.api.middleware:version_filter
+
+[filter:trust]
+paste.filter_factory = senlin.api.common.wsgi:filter_factory
+senlin.filter_factory = senlin.api.middleware:trust_filter
+
+[filter:webhook]
+paste.filter_factory = senlin.api.common.wsgi:filter_factory
+senlin.filter_factory = senlin.api.middleware:webhook_filter
+
+# Auth middleware that validates token against keystone
+[filter:authtoken]
+paste.filter_factory = keystonemiddleware.auth_token:filter_factory
diff --git a/senlin/templates/etc/_policy.json.tpl b/senlin/templates/etc/_policy.json.tpl
new file mode 100644
index 0000000000..d4e154600d
--- /dev/null
+++ b/senlin/templates/etc/_policy.json.tpl
@@ -0,0 +1,49 @@
+{
+    "context_is_admin":  "role:admin",
+    "deny_everybody": "!",
+
+    "build_info:build_info": "",
+    "profile_types:index": "",
+    "profile_types:get": "",
+    "policy_types:index": "",
+    "policy_types:get": "",
+    "clusters:index": "",
+    "clusters:create": "",
+    "clusters:delete": "",
+    "clusters:get": "",
+    "clusters:action": "",
+    "clusters:update": "",
+    "clusters:collect": "",
+    "profiles:index": "",
+    "profiles:create": "",
+    "profiles:get": "",
+    "profiles:delete": "",
+    "profiles:update": "",
+    "profiles:validate": "",
+    "nodes:index": "",
+    "nodes:create": "",
+    "nodes:get": "",
+    "nodes:action": "",
+    "nodes:update": "",
+    "nodes:delete": "",
+    "policies:index": "",
+    "policies:create": "",
+    "policies:get": "",
+    "policies:update": "",
+    "policies:delete": "",
+    "policies:validate": "",
+    "cluster_policies:index": "",
+    "cluster_policies:attach": "",
+    "cluster_policies:detach": "",
+    "cluster_policies:update": "",
+    "cluster_policies:get": "",
+    "receivers:index": "",
+    "receivers:create": "",
+    "receivers:get": "",
+    "receivers:delete": "",
+    "actions:index": "",
+    "actions:get": "",
+    "events:index": "",
+    "events:get": "",
+    "webhooks:trigger": ""
+}
diff --git a/senlin/templates/etc/_senlin.conf.tpl b/senlin/templates/etc/_senlin.conf.tpl
new file mode 100644
index 0000000000..99449957ea
--- /dev/null
+++ b/senlin/templates/etc/_senlin.conf.tpl
@@ -0,0 +1,1649 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{{ include "senlin.conf.senlin_values_skeleton" .Values.conf.senlin | trunc 0 }}
+{{ include "senlin.conf.senlin" .Values.conf.senlin }}
+
+
+{{- define "senlin.conf.senlin_values_skeleton" -}}
+
+{{- if not .default -}}{{- set . "default" dict -}}{{- end -}}
+{{- if not .default.oslo -}}{{- set .default "oslo" dict -}}{{- end -}}
+{{- if not .default.oslo.log -}}{{- set .default.oslo "log" dict -}}{{- end -}}
+{{- if not .default.oslo.messaging -}}{{- set .default.oslo "messaging" dict -}}{{- end -}}
+{{- if not .default.oslo.service -}}{{- set .default.oslo "service" dict -}}{{- end -}}
+{{- if not .default.oslo.service.periodic_task -}}{{- set .default.oslo.service "periodic_task" dict -}}{{- end -}}
+{{- if not .default.oslo.service.service -}}{{- set .default.oslo.service "service" dict -}}{{- end -}}
+{{- if not .default.senlin -}}{{- set .default "senlin" dict -}}{{- end -}}
+{{- if not .default.senlin.config -}}{{- set .default.senlin "config" dict -}}{{- end -}}
+{{- if not .authentication -}}{{- set . "authentication" dict -}}{{- end -}}
+{{- if not .authentication.senlin -}}{{- set .authentication "senlin" dict -}}{{- end -}}
+{{- if not .authentication.senlin.config -}}{{- set .authentication.senlin "config" dict -}}{{- end -}}
+{{- if not .database -}}{{- set . "database" dict -}}{{- end -}}
+{{- if not .database.oslo -}}{{- set .database "oslo" dict -}}{{- end -}}
+{{- if not .database.oslo.db -}}{{- set .database.oslo "db" dict -}}{{- end -}}
+{{- if not .keystone_authtoken -}}{{- set . "keystone_authtoken" dict -}}{{- end -}}
+{{- if not .keystone_authtoken.keystonemiddleware -}}{{- set .keystone_authtoken "keystonemiddleware" dict -}}{{- end -}}
+{{- if not .keystone_authtoken.keystonemiddleware.auth_token -}}{{- set .keystone_authtoken.keystonemiddleware "auth_token" dict -}}{{- end -}}
+{{- if not .matchmaker_redis -}}{{- set . "matchmaker_redis" dict -}}{{- end -}}
+{{- if not .matchmaker_redis.oslo -}}{{- set .matchmaker_redis "oslo" dict -}}{{- end -}}
+{{- if not .matchmaker_redis.oslo.messaging -}}{{- set .matchmaker_redis.oslo "messaging" dict -}}{{- end -}}
+{{- if not .oslo_messaging_amqp -}}{{- set . "oslo_messaging_amqp" dict -}}{{- end -}}
+{{- if not .oslo_messaging_amqp.oslo -}}{{- set .oslo_messaging_amqp "oslo" dict -}}{{- end -}}
+{{- if not .oslo_messaging_amqp.oslo.messaging -}}{{- set .oslo_messaging_amqp.oslo "messaging" dict -}}{{- end -}}
+{{- if not .oslo_messaging_notifications -}}{{- set . "oslo_messaging_notifications" dict -}}{{- end -}}
+{{- if not .oslo_messaging_notifications.oslo -}}{{- set .oslo_messaging_notifications "oslo" dict -}}{{- end -}}
+{{- if not .oslo_messaging_notifications.oslo.messaging -}}{{- set .oslo_messaging_notifications.oslo "messaging" dict -}}{{- end -}}
+{{- if not .oslo_messaging_rabbit -}}{{- set . "oslo_messaging_rabbit" dict -}}{{- end -}}
+{{- if not .oslo_messaging_rabbit.oslo -}}{{- set .oslo_messaging_rabbit "oslo" dict -}}{{- end -}}
+{{- if not .oslo_messaging_rabbit.oslo.messaging -}}{{- set .oslo_messaging_rabbit.oslo "messaging" dict -}}{{- end -}}
+{{- if not .oslo_messaging_zmq -}}{{- set . "oslo_messaging_zmq" dict -}}{{- end -}}
+{{- if not .oslo_messaging_zmq.oslo -}}{{- set .oslo_messaging_zmq "oslo" dict -}}{{- end -}}
+{{- if not .oslo_messaging_zmq.oslo.messaging -}}{{- set .oslo_messaging_zmq.oslo "messaging" dict -}}{{- end -}}
+{{- if not .oslo_policy -}}{{- set . "oslo_policy" dict -}}{{- end -}}
+{{- if not .oslo_policy.oslo -}}{{- set .oslo_policy "oslo" dict -}}{{- end -}}
+{{- if not .oslo_policy.oslo.policy -}}{{- set .oslo_policy.oslo "policy" dict -}}{{- end -}}
+{{- if not .revision -}}{{- set . "revision" dict -}}{{- end -}}
+{{- if not .revision.senlin -}}{{- set .revision "senlin" dict -}}{{- end -}}
+{{- if not .revision.senlin.config -}}{{- set .revision.senlin "config" dict -}}{{- end -}}
+{{- if not .senlin_api -}}{{- set . "senlin_api" dict -}}{{- end -}}
+{{- if not .senlin_api.senlin -}}{{- set .senlin_api "senlin" dict -}}{{- end -}}
+{{- if not .senlin_api.senlin.config -}}{{- set .senlin_api.senlin "config" dict -}}{{- end -}}
+{{- if not .ssl -}}{{- set . "ssl" dict -}}{{- end -}}
+{{- if not .ssl.oslo -}}{{- set .ssl "oslo" dict -}}{{- end -}}
+{{- if not .ssl.oslo.service -}}{{- set .ssl.oslo "service" dict -}}{{- end -}}
+{{- if not .ssl.oslo.service.sslutils -}}{{- set .ssl.oslo.service "sslutils" dict -}}{{- end -}}
+{{- if not .webhook -}}{{- set . "webhook" dict -}}{{- end -}}
+{{- if not .webhook.senlin -}}{{- set .webhook "senlin" dict -}}{{- end -}}
+{{- if not .webhook.senlin.config -}}{{- set .webhook.senlin "config" dict -}}{{- end -}}
+{{- if not .zaqar -}}{{- set . "zaqar" dict -}}{{- end -}}
+{{- if not .zaqar.senlin -}}{{- set .zaqar "senlin" dict -}}{{- end -}}
+{{- if not .zaqar.senlin.config -}}{{- set .zaqar.senlin "config" dict -}}{{- end -}}
+
+{{- end -}}
+
+
+{{- define "senlin.conf.senlin" -}}
+
+[DEFAULT]
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+# from .default.oslo.log.debug
+{{ if not .default.oslo.log.debug }}#{{ end }}debug = {{ .default.oslo.log.debug | default "false" }}
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# from .default.oslo.log.verbose
+{{ if not .default.oslo.log.verbose }}#{{ end }}verbose = {{ .default.oslo.log.verbose | default "true" }}
+
+# The name of a logging configuration file. This file is appended to any existing logging configuration files. For
+# details about logging configuration files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the configuration file and other logging
+# configuration options are ignored (for example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+# from .default.oslo.log.log_config_append
+{{ if not .default.oslo.log.log_config_append }}#{{ end }}log_config_append = {{ .default.oslo.log.log_config_append | default "<None>" }}
+
+# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if
+# log_config_append is set. (string value)
+# from .default.oslo.log.log_date_format
+{{ if not .default.oslo.log.log_date_format }}#{{ end }}log_date_format = {{ .default.oslo.log.log_date_format | default "%Y-%m-%d %H:%M:%S" }}
+
+# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by
+# use_stderr. This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+# from .default.oslo.log.log_file
+{{ if not .default.oslo.log.log_file }}#{{ end }}log_file = {{ .default.oslo.log.log_file | default "<None>" }}
+
+# (Optional) The base directory used for relative log_file  paths. This option is ignored if log_config_append is set.
+# (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+# from .default.oslo.log.log_dir
+{{ if not .default.oslo.log.log_dir }}#{{ end }}log_dir = {{ .default.oslo.log.log_dir | default "<None>" }}
+
+# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new
+# log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform
+# is used. This option is ignored if log_config_append is set. (boolean value)
+# from .default.oslo.log.watch_log_file
+{{ if not .default.oslo.log.watch_log_file }}#{{ end }}watch_log_file = {{ .default.oslo.log.watch_log_file | default "false" }}
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option
+# is ignored if log_config_append is set. (boolean value)
+# from .default.oslo.log.use_syslog
+{{ if not .default.oslo.log.use_syslog }}#{{ end }}use_syslog = {{ .default.oslo.log.use_syslog | default "false" }}
+
+# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+# from .default.oslo.log.syslog_log_facility
+{{ if not .default.oslo.log.syslog_log_facility }}#{{ end }}syslog_log_facility = {{ .default.oslo.log.syslog_log_facility | default "LOG_USER" }}
+
+# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+# from .default.oslo.log.use_stderr
+{{ if not .default.oslo.log.use_stderr }}#{{ end }}use_stderr = {{ .default.oslo.log.use_stderr | default "true" }}
+
+# Format string to use for log messages with context. (string value)
+# from .default.oslo.log.logging_context_format_string
+{{ if not .default.oslo.log.logging_context_format_string }}#{{ end }}logging_context_format_string = {{ .default.oslo.log.logging_context_format_string | default "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s" }}
+
+# Format string to use for log messages when context is undefined. (string value)
+# from .default.oslo.log.logging_default_format_string
+{{ if not .default.oslo.log.logging_default_format_string }}#{{ end }}logging_default_format_string = {{ .default.oslo.log.logging_default_format_string | default "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s" }}
+
+# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+# from .default.oslo.log.logging_debug_format_suffix
+{{ if not .default.oslo.log.logging_debug_format_suffix }}#{{ end }}logging_debug_format_suffix = {{ .default.oslo.log.logging_debug_format_suffix | default "%(funcName)s %(pathname)s:%(lineno)d" }}
+
+# Prefix each line of exception output with this format. (string value)
+# from .default.oslo.log.logging_exception_prefix
+{{ if not .default.oslo.log.logging_exception_prefix }}#{{ end }}logging_exception_prefix = {{ .default.oslo.log.logging_exception_prefix | default "%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s" }}
+
+# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+# from .default.oslo.log.logging_user_identity_format
+{{ if not .default.oslo.log.logging_user_identity_format }}#{{ end }}logging_user_identity_format = {{ .default.oslo.log.logging_user_identity_format | default "%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s" }}
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list
+# value)
+# from .default.oslo.log.default_log_levels
+{{ if not .default.oslo.log.default_log_levels }}#{{ end }}default_log_levels = {{ .default.oslo.log.default_log_levels | default "amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO" }}
+
+# Enables or disables publication of error events. (boolean value)
+# from .default.oslo.log.publish_errors
+{{ if not .default.oslo.log.publish_errors }}#{{ end }}publish_errors = {{ .default.oslo.log.publish_errors | default "false" }}
+
+# The format for an instance that is passed with the log message. (string value)
+# from .default.oslo.log.instance_format
+{{ if not .default.oslo.log.instance_format }}#{{ end }}instance_format = {{ .default.oslo.log.instance_format | default "\"[instance: %(uuid)s] \"" }}
+
+# The format for an instance UUID that is passed with the log message. (string value)
+# from .default.oslo.log.instance_uuid_format
+{{ if not .default.oslo.log.instance_uuid_format }}#{{ end }}instance_uuid_format = {{ .default.oslo.log.instance_uuid_format | default "\"[instance: %(uuid)s] \"" }}
+
+# Enables or disables fatal status of deprecations. (boolean value)
+# from .default.oslo.log.fatal_deprecations
+{{ if not .default.oslo.log.fatal_deprecations }}#{{ end }}fatal_deprecations = {{ .default.oslo.log.fatal_deprecations | default "false" }}
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+# from .default.oslo.messaging.rpc_conn_pool_size
+{{ if not .default.oslo.messaging.rpc_conn_pool_size }}#{{ end }}rpc_conn_pool_size = {{ .default.oslo.messaging.rpc_conn_pool_size | default "30" }}
+
+# The pool size limit for connections expiration policy (integer value)
+# from .default.oslo.messaging.conn_pool_min_size
+{{ if not .default.oslo.messaging.conn_pool_min_size }}#{{ end }}conn_pool_min_size = {{ .default.oslo.messaging.conn_pool_min_size | default "2" }}
+
+# The time-to-live in sec of idle connections in the pool (integer value)
+# from .default.oslo.messaging.conn_pool_ttl
+{{ if not .default.oslo.messaging.conn_pool_ttl }}#{{ end }}conn_pool_ttl = {{ .default.oslo.messaging.conn_pool_ttl | default "1200" }}
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or
+# resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+# from .default.oslo.messaging.rpc_zmq_bind_address
+{{ if not .default.oslo.messaging.rpc_zmq_bind_address }}#{{ end }}rpc_zmq_bind_address = {{ .default.oslo.messaging.rpc_zmq_bind_address | default "*" }}
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+# from .default.oslo.messaging.rpc_zmq_matchmaker
+{{ if not .default.oslo.messaging.rpc_zmq_matchmaker }}#{{ end }}rpc_zmq_matchmaker = {{ .default.oslo.messaging.rpc_zmq_matchmaker | default "redis" }}
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+# from .default.oslo.messaging.rpc_zmq_contexts
+{{ if not .default.oslo.messaging.rpc_zmq_contexts }}#{{ end }}rpc_zmq_contexts = {{ .default.oslo.messaging.rpc_zmq_contexts | default "1" }}
+
+# Maximum number of ingress messages to locally buffer per topic. Default is unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+# from .default.oslo.messaging.rpc_zmq_topic_backlog
+{{ if not .default.oslo.messaging.rpc_zmq_topic_backlog }}#{{ end }}rpc_zmq_topic_backlog = {{ .default.oslo.messaging.rpc_zmq_topic_backlog | default "<None>" }}
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+# from .default.oslo.messaging.rpc_zmq_ipc_dir
+{{ if not .default.oslo.messaging.rpc_zmq_ipc_dir }}#{{ end }}rpc_zmq_ipc_dir = {{ .default.oslo.messaging.rpc_zmq_ipc_dir | default "/var/run/openstack" }}
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova. (string
+# value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+# from .default.oslo.messaging.rpc_zmq_host
+{{ if not .default.oslo.messaging.rpc_zmq_host }}#{{ end }}rpc_zmq_host = {{ .default.oslo.messaging.rpc_zmq_host | default "localhost" }}
+
+# Seconds to wait before a cast expires (TTL). The default value of -1 specifies an infinite linger period. The value
+# of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Only
+# supported by impl_zmq. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+# from .default.oslo.messaging.rpc_cast_timeout
+{{ if not .default.oslo.messaging.rpc_cast_timeout }}#{{ end }}rpc_cast_timeout = {{ .default.oslo.messaging.rpc_cast_timeout | default "-1" }}
+
+# The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+# from .default.oslo.messaging.rpc_poll_timeout
+{{ if not .default.oslo.messaging.rpc_poll_timeout }}#{{ end }}rpc_poll_timeout = {{ .default.oslo.messaging.rpc_poll_timeout | default "1" }}
+
+# Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+# from .default.oslo.messaging.zmq_target_expire
+{{ if not .default.oslo.messaging.zmq_target_expire }}#{{ end }}zmq_target_expire = {{ .default.oslo.messaging.zmq_target_expire | default "300" }}
+
+# Update period in seconds of a name service record about existing target. (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+# from .default.oslo.messaging.zmq_target_update
+{{ if not .default.oslo.messaging.zmq_target_update }}#{{ end }}zmq_target_update = {{ .default.oslo.messaging.zmq_target_update | default "180" }}
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+# from .default.oslo.messaging.use_pub_sub
+{{ if not .default.oslo.messaging.use_pub_sub }}#{{ end }}use_pub_sub = {{ .default.oslo.messaging.use_pub_sub | default "true" }}
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+# from .default.oslo.messaging.use_router_proxy
+{{ if not .default.oslo.messaging.use_router_proxy }}#{{ end }}use_router_proxy = {{ .default.oslo.messaging.use_router_proxy | default "true" }}
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+# from .default.oslo.messaging.rpc_zmq_min_port
+{{ if not .default.oslo.messaging.rpc_zmq_min_port }}#{{ end }}rpc_zmq_min_port = {{ .default.oslo.messaging.rpc_zmq_min_port | default "49153" }}
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+# from .default.oslo.messaging.rpc_zmq_max_port
+{{ if not .default.oslo.messaging.rpc_zmq_max_port }}#{{ end }}rpc_zmq_max_port = {{ .default.oslo.messaging.rpc_zmq_max_port | default "65536" }}
+
+# Number of retries to find free port number before fail with ZMQBindError. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+# from .default.oslo.messaging.rpc_zmq_bind_port_retries
+{{ if not .default.oslo.messaging.rpc_zmq_bind_port_retries }}#{{ end }}rpc_zmq_bind_port_retries = {{ .default.oslo.messaging.rpc_zmq_bind_port_retries | default "100" }}
+
+# Default serialization mechanism for serializing/deserializing outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+# from .default.oslo.messaging.rpc_zmq_serialization
+{{ if not .default.oslo.messaging.rpc_zmq_serialization }}#{{ end }}rpc_zmq_serialization = {{ .default.oslo.messaging.rpc_zmq_serialization | default "json" }}
+
+# This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects.
+# False means to keep queue and messages even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+# from .default.oslo.messaging.zmq_immediate
+{{ if not .default.oslo.messaging.zmq_immediate }}#{{ end }}zmq_immediate = {{ .default.oslo.messaging.zmq_immediate | default "false" }}
+
+# Size of executor thread pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+# from .default.oslo.messaging.executor_thread_pool_size
+{{ if not .default.oslo.messaging.executor_thread_pool_size }}#{{ end }}executor_thread_pool_size = {{ .default.oslo.messaging.executor_thread_pool_size | default "64" }}
+
+# Seconds to wait for a response from a call. (integer value)
+# from .default.oslo.messaging.rpc_response_timeout
+{{ if not .default.oslo.messaging.rpc_response_timeout }}#{{ end }}rpc_response_timeout = {{ .default.oslo.messaging.rpc_response_timeout | default "60" }}
+
+# A URL representing the messaging driver to use and its full configuration. (string value)
+# from .default.oslo.messaging.transport_url
+{{ if not .default.oslo.messaging.transport_url }}#{{ end }}transport_url = {{ .default.oslo.messaging.transport_url | default "<None>" }}
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+# from .default.oslo.messaging.rpc_backend
+{{ if not .default.oslo.messaging.rpc_backend }}#{{ end }}rpc_backend = {{ .default.oslo.messaging.rpc_backend | default "rabbit" }}
+
+# The default exchange under which topics are scoped. May be overridden by an exchange name specified in the
+# transport_url option. (string value)
+# from .default.oslo.messaging.control_exchange
+{{ if not .default.oslo.messaging.control_exchange }}#{{ end }}control_exchange = {{ .default.oslo.messaging.control_exchange | default "openstack" }}
+
+#
+# From oslo.service.periodic_task
+#
+
+# Some periodic tasks can be run in a separate process. Should we run them here? (boolean value)
+# from .default.oslo.service.periodic_task.run_external_periodic_tasks
+{{ if not .default.oslo.service.periodic_task.run_external_periodic_tasks }}#{{ end }}run_external_periodic_tasks = {{ .default.oslo.service.periodic_task.run_external_periodic_tasks | default "true" }}
+
+#
+# From oslo.service.service
+#
+
+# Enable eventlet backdoor.  Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a
+# random tcp port number; <port> results in listening on the specified port number (and not enabling backdoor if that
+# port is in use); and <start>:<end> results in listening on the smallest unused port number within the specified range
+# of port numbers.  The chosen port is displayed in the service's log file. (string value)
+# from .default.oslo.service.service.backdoor_port
+{{ if not .default.oslo.service.service.backdoor_port }}#{{ end }}backdoor_port = {{ .default.oslo.service.service.backdoor_port | default "<None>" }}
+
+# Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is
+# mutually exclusive with 'backdoor_port' in that only one should be provided. If both are provided then the existence
+# of this option overrides the usage of that option. (string value)
+# from .default.oslo.service.service.backdoor_socket
+{{ if not .default.oslo.service.service.backdoor_socket }}#{{ end }}backdoor_socket = {{ .default.oslo.service.service.backdoor_socket | default "<None>" }}
+
+# Enables or disables logging values of all registered options when starting a service (at DEBUG level). (boolean
+# value)
+# from .default.oslo.service.service.log_options
+{{ if not .default.oslo.service.service.log_options }}#{{ end }}log_options = {{ .default.oslo.service.service.log_options | default "true" }}
+
+# Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait. (integer value)
+# from .default.oslo.service.service.graceful_shutdown_timeout
+{{ if not .default.oslo.service.service.graceful_shutdown_timeout }}#{{ end }}graceful_shutdown_timeout = {{ .default.oslo.service.service.graceful_shutdown_timeout | default "60" }}
+
+#
+# From senlin.config
+#
+
+# Default cloud backend to use. (string value)
+# from .default.senlin.config.cloud_backend
+{{ if not .default.senlin.config.cloud_backend }}#{{ end }}cloud_backend = {{ .default.senlin.config.cloud_backend | default "openstack" }}
+
+# Name of the engine node. This can be an opaque identifier. It is not necessarily a hostname, FQDN, or IP address.
+# (string value)
+# from .default.senlin.config.host
+{{ if not .default.senlin.config.host }}#{{ end }}host = {{ .default.senlin.config.host | default "aaed021d3eb8" }}
+
+# Seconds between running periodic tasks. (integer value)
+# from .default.senlin.config.periodic_interval
+{{ if not .default.senlin.config.periodic_interval }}#{{ end }}periodic_interval = {{ .default.senlin.config.periodic_interval | default "60" }}
+
+# Seconds between periodic tasks to be called (integer value)
+# from .default.senlin.config.periodic_interval_max
+{{ if not .default.senlin.config.periodic_interval_max }}#{{ end }}periodic_interval_max = {{ .default.senlin.config.periodic_interval_max | default "120" }}
+
+# Range of seconds to randomly delay when starting the periodic task scheduler to reduce stampeding. (Disable by
+# setting to 0) (integer value)
+# from .default.senlin.config.periodic_fuzzy_delay
+{{ if not .default.senlin.config.periodic_fuzzy_delay }}#{{ end }}periodic_fuzzy_delay = {{ .default.senlin.config.periodic_fuzzy_delay | default "10" }}
+
+# Number of senlin-engine processes to fork and run. (integer value)
+# from .default.senlin.config.num_engine_workers
+{{ if not .default.senlin.config.num_engine_workers }}#{{ end }}num_engine_workers = {{ .default.senlin.config.num_engine_workers | default "1" }}
+
+# The directory to search for environment files. (string value)
+# from .default.senlin.config.environment_dir
+{{ if not .default.senlin.config.environment_dir }}#{{ end }}environment_dir = {{ .default.senlin.config.environment_dir | default "/etc/senlin/environments" }}
+
+# Maximum nodes allowed per top-level cluster. (integer value)
+# from .default.senlin.config.max_nodes_per_cluster
+{{ if not .default.senlin.config.max_nodes_per_cluster }}#{{ end }}max_nodes_per_cluster = {{ .default.senlin.config.max_nodes_per_cluster | default "1000" }}
+
+# Maximum number of clusters any one project may have active at one time. (integer value)
+# from .default.senlin.config.max_clusters_per_project
+{{ if not .default.senlin.config.max_clusters_per_project }}#{{ end }}max_clusters_per_project = {{ .default.senlin.config.max_clusters_per_project | default "100" }}
+
+# Timeout in seconds for actions. (integer value)
+# from .default.senlin.config.default_action_timeout
+{{ if not .default.senlin.config.default_action_timeout }}#{{ end }}default_action_timeout = {{ .default.senlin.config.default_action_timeout | default "3600" }}
+
+# Maximum number of node actions that each engine worker can schedule consecutively per batch. 0 means no limit.
+# (integer value)
+# from .default.senlin.config.max_actions_per_batch
+{{ if not .default.senlin.config.max_actions_per_batch }}#{{ end }}max_actions_per_batch = {{ .default.senlin.config.max_actions_per_batch | default "0" }}
+
+# Seconds to pause between scheduling two consecutive batches of node actions. (integer value)
+# from .default.senlin.config.batch_interval
+{{ if not .default.senlin.config.batch_interval }}#{{ end }}batch_interval = {{ .default.senlin.config.batch_interval | default "3" }}
+
+# Number of times trying to grab a lock. (integer value)
+# from .default.senlin.config.lock_retry_times
+{{ if not .default.senlin.config.lock_retry_times }}#{{ end }}lock_retry_times = {{ .default.senlin.config.lock_retry_times | default "3" }}
+
+# Number of seconds between lock retries. (integer value)
+# from .default.senlin.config.lock_retry_interval
+{{ if not .default.senlin.config.lock_retry_interval }}#{{ end }}lock_retry_interval = {{ .default.senlin.config.lock_retry_interval | default "10" }}
+
+# RPC timeout for the engine liveness check that is used for cluster locking. (integer value)
+# from .default.senlin.config.engine_life_check_timeout
+{{ if not .default.senlin.config.engine_life_check_timeout }}#{{ end }}engine_life_check_timeout = {{ .default.senlin.config.engine_life_check_timeout | default "2" }}
+
+# Flag to indicate whether to enforce unique names for Senlin objects belonging to the same project. (boolean value)
+# from .default.senlin.config.name_unique
+{{ if not .default.senlin.config.name_unique }}#{{ end }}name_unique = {{ .default.senlin.config.name_unique | default "false" }}
+
+# Default region name used to get services endpoints. (string value)
+# from .default.senlin.config.default_region_name
+{{ if not .default.senlin.config.default_region_name }}#{{ end }}default_region_name = {{ .default.senlin.config.default_region_name | default "<None>" }}
+
+# Maximum raw byte size of data from web response. (integer value)
+# from .default.senlin.config.max_response_size
+{{ if not .default.senlin.config.max_response_size }}#{{ end }}max_response_size = {{ .default.senlin.config.max_response_size | default "524288" }}
+
+
+[authentication]
+
+#
+# From senlin.config
+#
+
+# Complete public identity V3 API endpoint. (string value)
+# from .authentication.senlin.config.auth_url
+{{ if not .authentication.senlin.config.auth_url }}#{{ end }}auth_url = {{ .authentication.senlin.config.auth_url | default "" }}
+
+# Senlin service user name (string value)
+# from .authentication.senlin.config.service_username
+{{ if not .authentication.senlin.config.service_username }}#{{ end }}service_username = {{ .authentication.senlin.config.service_username | default "senlin" }}
+
+# Password specified for the Senlin service user. (string value)
+# from .authentication.senlin.config.service_password
+{{ if not .authentication.senlin.config.service_password }}#{{ end }}service_password = {{ .authentication.senlin.config.service_password | default "" }}
+
+# Name of the service project. (string value)
+# from .authentication.senlin.config.service_project_name
+{{ if not .authentication.senlin.config.service_project_name }}#{{ end }}service_project_name = {{ .authentication.senlin.config.service_project_name | default "service" }}
+
+# Name of the domain for the service user. (string value)
+# from .authentication.senlin.config.service_user_domain
+{{ if not .authentication.senlin.config.service_user_domain }}#{{ end }}service_user_domain = {{ .authentication.senlin.config.service_user_domain | default "Default" }}
+
+# Name of the domain for the service project. (string value)
+# from .authentication.senlin.config.service_project_domain
+{{ if not .authentication.senlin.config.service_project_domain }}#{{ end }}service_project_domain = {{ .authentication.senlin.config.service_project_domain | default "Default" }}
+
+
+[database]
+
+#
+# From oslo.db
+#
+
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect the database.
+# from .database.oslo.db.sqlite_db
+{{ if not .database.oslo.db.sqlite_db }}#{{ end }}sqlite_db = {{ .database.oslo.db.sqlite_db | default "oslo.sqlite" }}
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+# from .database.oslo.db.sqlite_synchronous
+{{ if not .database.oslo.db.sqlite_synchronous }}#{{ end }}sqlite_synchronous = {{ .database.oslo.db.sqlite_synchronous | default "true" }}
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+# from .database.oslo.db.backend
+{{ if not .database.oslo.db.backend }}#{{ end }}backend = {{ .database.oslo.db.backend | default "sqlalchemy" }}
+
+# The SQLAlchemy connection string to use to connect to the database. (string value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+# from .database.oslo.db.connection
+{{ if not .database.oslo.db.connection }}#{{ end }}connection = {{ .database.oslo.db.connection | default "<None>" }}
+
+# The SQLAlchemy connection string to use to connect to the slave database. (string value)
+# from .database.oslo.db.slave_connection
+{{ if not .database.oslo.db.slave_connection }}#{{ end }}slave_connection = {{ .database.oslo.db.slave_connection | default "<None>" }}
+
+# The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To
+# use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode= (string
+# value)
+# from .database.oslo.db.mysql_sql_mode
+{{ if not .database.oslo.db.mysql_sql_mode }}#{{ end }}mysql_sql_mode = {{ .database.oslo.db.mysql_sql_mode | default "TRADITIONAL" }}
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+# from .database.oslo.db.idle_timeout
+{{ if not .database.oslo.db.idle_timeout }}#{{ end }}idle_timeout = {{ .database.oslo.db.idle_timeout | default "3600" }}
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+# from .database.oslo.db.min_pool_size
+{{ if not .database.oslo.db.min_pool_size }}#{{ end }}min_pool_size = {{ .database.oslo.db.min_pool_size | default "1" }}
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+# from .database.oslo.db.max_pool_size
+{{ if not .database.oslo.db.max_pool_size }}#{{ end }}max_pool_size = {{ .database.oslo.db.max_pool_size | default "5" }}
+
+# Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+# from .database.oslo.db.max_retries
+{{ if not .database.oslo.db.max_retries }}#{{ end }}max_retries = {{ .database.oslo.db.max_retries | default "10" }}
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+# from .database.oslo.db.retry_interval
+{{ if not .database.oslo.db.retry_interval }}#{{ end }}retry_interval = {{ .database.oslo.db.retry_interval | default "10" }}
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+# from .database.oslo.db.max_overflow
+{{ if not .database.oslo.db.max_overflow }}#{{ end }}max_overflow = {{ .database.oslo.db.max_overflow | default "50" }}
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+# from .database.oslo.db.connection_debug
+{{ if not .database.oslo.db.connection_debug }}#{{ end }}connection_debug = {{ .database.oslo.db.connection_debug | default "0" }}
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+# from .database.oslo.db.connection_trace
+{{ if not .database.oslo.db.connection_trace }}#{{ end }}connection_trace = {{ .database.oslo.db.connection_trace | default "false" }}
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+# from .database.oslo.db.pool_timeout
+{{ if not .database.oslo.db.pool_timeout }}#{{ end }}pool_timeout = {{ .database.oslo.db.pool_timeout | default "<None>" }}
+
+# Enable the experimental use of database reconnect on connection lost. (boolean value)
+# from .database.oslo.db.use_db_reconnect
+{{ if not .database.oslo.db.use_db_reconnect }}#{{ end }}use_db_reconnect = {{ .database.oslo.db.use_db_reconnect | default "false" }}
+
+# Seconds between retries of a database transaction. (integer value)
+# from .database.oslo.db.db_retry_interval
+{{ if not .database.oslo.db.db_retry_interval }}#{{ end }}db_retry_interval = {{ .database.oslo.db.db_retry_interval | default "1" }}
+
+# If True, increases the interval between retries of a database operation up to db_max_retry_interval. (boolean value)
+# from .database.oslo.db.db_inc_retry_interval
+{{ if not .database.oslo.db.db_inc_retry_interval }}#{{ end }}db_inc_retry_interval = {{ .database.oslo.db.db_inc_retry_interval | default "true" }}
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a database operation. (integer value)
+# from .database.oslo.db.db_max_retry_interval
+{{ if not .database.oslo.db.db_max_retry_interval }}#{{ end }}db_max_retry_interval = {{ .database.oslo.db.db_max_retry_interval | default "10" }}
+
+# Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an
+# infinite retry count. (integer value)
+# from .database.oslo.db.db_max_retries
+{{ if not .database.oslo.db.db_max_retries }}#{{ end }}db_max_retries = {{ .database.oslo.db.db_max_retries | default "20" }}
+
+
+[keystone_authtoken]
+
+# FIXME(alanmeadows) - added the next several lines because oslo gen config refuses to generate the line items required in keystonemiddleware
+# for authentication - while it does support an "auth_section" parameter to locate these elsewhere, it would be a strange divergence
+# from how neutron keystone authentication is stored today - ocata and later appear to use a "service" user section which can house these details
+# and does successfully generate beyond newton, so likely this whole section will be removed the next time we generate this file
+
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_url }}#{{ end }}auth_url = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_url | default "<None>" }}
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.region_name }}#{{ end }}region_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.region_name | default "<None>" }}
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.project_name }}#{{ end }}project_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.project_name | default "<None>" }}
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.project_domain_name }}#{{ end }}project_domain_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.project_domain_name | default "<None>" }}
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.user_domain_name }}#{{ end }}user_domain_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.user_domain_name | default "<None>" }}
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.username }}#{{ end }}username = {{ .keystone_authtoken.keystonemiddleware.auth_token.username | default "<None>" }}
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.password }}#{{ end }}password = {{ .keystone_authtoken.keystonemiddleware.auth_token.password | default "<None>" }}
+
+# FIXME(alanmeadows) - added for some newton images using older keystoneauth1 libs but are still "newton"
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_url }}#{{ end }}auth_url = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_url | default "<None>" }}
+
+#
+# From keystonemiddleware.auth_token
+#
+
+# Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible
+# by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint
+# should  ideally be unversioned, client support in the wild varies.  If you're using a versioned v2 endpoint here,
+# then this  should *not* be the same endpoint the service user utilizes  for validating tokens, because normal end
+# users may not be  able to reach that endpoint. (string value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.auth_uri
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_uri }}#{{ end }}auth_uri = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_uri | default "<None>" }}
+
+# API version of the admin Identity API endpoint. (string value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.auth_version
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_version }}#{{ end }}auth_version = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_version | default "<None>" }}
+
+# Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream
+# WSGI components. (boolean value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision }}#{{ end }}delay_auth_decision = {{ .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision | default "false" }}
+
+# Request timeout value for communicating with Identity API server. (integer value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout }}#{{ end }}http_connect_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout | default "<None>" }}
+
+# How many times are we trying to reconnect when communicating with Identity API Server. (integer value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries }}#{{ end }}http_request_max_retries = {{ .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries | default "3" }}
+
+# Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift
+# cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.cache
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.cache }}#{{ end }}cache = {{ .keystone_authtoken.keystonemiddleware.auth_token.cache | default "<None>" }}
+
+# Required if identity server requires client certificate (string value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.certfile
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.certfile }}#{{ end }}certfile = {{ .keystone_authtoken.keystonemiddleware.auth_token.certfile | default "<None>" }}
+
+# Required if identity server requires client certificate (string value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.keyfile
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.keyfile }}#{{ end }}keyfile = {{ .keystone_authtoken.keystonemiddleware.auth_token.keyfile | default "<None>" }}
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs. (string value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.cafile
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.cafile }}#{{ end }}cafile = {{ .keystone_authtoken.keystonemiddleware.auth_token.cafile | default "<None>" }}
+
+# Verify HTTPS connections. (boolean value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.insecure
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.insecure }}#{{ end }}insecure = {{ .keystone_authtoken.keystonemiddleware.auth_token.insecure | default "false" }}
+
+# The region in which the identity server can be found. (string value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.region_name
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.region_name }}#{{ end }}region_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.region_name | default "<None>" }}
+
+# Directory used to cache files related to PKI tokens. (string value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.signing_dir
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.signing_dir }}#{{ end }}signing_dir = {{ .keystone_authtoken.keystonemiddleware.auth_token.signing_dir | default "<None>" }}
+
+# Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached
+# in-process. (list value)
+# Deprecated group/name - [keystone_authtoken]/memcache_servers
+# from .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers }}#{{ end }}memcached_servers = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers | default "<None>" }}
+
+# In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a
+# configurable duration (in seconds). Set to -1 to disable caching completely. (integer value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time }}#{{ end }}token_cache_time = {{ .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time | default "300" }}
+
+# Determines the frequency at which the list of revoked tokens is retrieved from the Identity service (in seconds). A
+# high number of revocation events combined with a low cache duration may significantly reduce performance. Only valid
+# for PKI tokens. (integer value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time }}#{{ end }}revocation_cache_time = {{ .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time | default "10" }}
+
+# (Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC,
+# token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the
+# cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.
+# (string value)
+# Allowed values: None, MAC, ENCRYPT
+# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy }}#{{ end }}memcache_security_strategy = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy | default "None" }}
+
+# (Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation. (string value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key }}#{{ end }}memcache_secret_key = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key | default "<None>" }}
+
+# (Optional) Number of seconds memcached server is considered dead before it is tried again. (integer value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry }}#{{ end }}memcache_pool_dead_retry = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry | default "300" }}
+
+# (Optional) Maximum total number of open connections to every memcached server. (integer value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize }}#{{ end }}memcache_pool_maxsize = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize | default "10" }}
+
+# (Optional) Socket timeout in seconds for communicating with a memcached server. (integer value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout }}#{{ end }}memcache_pool_socket_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout | default "3" }}
+
+# (Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed. (integer
+# value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout }}#{{ end }}memcache_pool_unused_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout | default "60" }}
+
+# (Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool. (integer
+# value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout }}#{{ end }}memcache_pool_conn_get_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout | default "10" }}
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x.
+# (boolean value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool }}#{{ end }}memcache_use_advanced_pool = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool | default "false" }}
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service
+# catalog on token validation and will not set the X-Service-Catalog header. (boolean value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog }}#{{ end }}include_service_catalog = {{ .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog | default "true" }}
+
+# Used to control the use and type of token binding. Can be set to: "disabled" to not check token binding. "permissive"
+# (default) to validate binding information if the bind type is of a form known to the server and ignore it if not.
+# "strict" like "permissive" but if the bind type is unknown the token will be rejected. "required" any form of token
+# binding is needed to be allowed. Finally the name of a binding method that must be present in tokens. (string value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind }}#{{ end }}enforce_token_bind = {{ .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind | default "permissive" }}
+
+# If true, the revocation list will be checked for cached tokens. This requires that PKI tokens are configured on the
+# identity server. (boolean value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached }}#{{ end }}check_revocations_for_cached = {{ .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached | default "false" }}
+
+# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm or multiple. The algorithms are those
+# supported by Python standard hashlib.new(). The hashes will be tried in the order given, so put the preferred one
+# first for performance. The result of the first hash will be stored in the cache. This will typically be set to
+# multiple values only while migrating from a less secure algorithm to a more secure one. Once all the old tokens are
+# expired this option should be set to a single value for better performance. (list value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms }}#{{ end }}hash_algorithms = {{ .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms | default "md5" }}
+
+# Authentication type to load (string value)
+# Deprecated group/name - [keystone_authtoken]/auth_plugin
+# from .keystone_authtoken.keystonemiddleware.auth_token.auth_type
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_type }}#{{ end }}auth_type = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_type | default "<None>" }}
+
+# Config Section from which to load plugin specific options (string value)
+# from .keystone_authtoken.keystonemiddleware.auth_token.auth_section
+{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_section }}#{{ end }}auth_section = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_section | default "<None>" }}
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+# from .matchmaker_redis.oslo.messaging.host
+{{ if not .matchmaker_redis.oslo.messaging.host }}#{{ end }}host = {{ .matchmaker_redis.oslo.messaging.host | default "127.0.0.1" }}
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+# from .matchmaker_redis.oslo.messaging.port
+{{ if not .matchmaker_redis.oslo.messaging.port }}#{{ end }}port = {{ .matchmaker_redis.oslo.messaging.port | default "6379" }}
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+# from .matchmaker_redis.oslo.messaging.password
+{{ if not .matchmaker_redis.oslo.messaging.password }}#{{ end }}password = {{ .matchmaker_redis.oslo.messaging.password | default "" }}
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode) e.g.                [host:port, host1:port ... ]
+# (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+# from .matchmaker_redis.oslo.messaging.sentinel_hosts
+{{ if not .matchmaker_redis.oslo.messaging.sentinel_hosts }}#{{ end }}sentinel_hosts = {{ .matchmaker_redis.oslo.messaging.sentinel_hosts | default "" }}
+
+# Redis replica set name. (string value)
+# from .matchmaker_redis.oslo.messaging.sentinel_group_name
+{{ if not .matchmaker_redis.oslo.messaging.sentinel_group_name }}#{{ end }}sentinel_group_name = {{ .matchmaker_redis.oslo.messaging.sentinel_group_name | default "oslo-messaging-zeromq" }}
+
+# Time in ms to wait between connection attempts. (integer value)
+# from .matchmaker_redis.oslo.messaging.wait_timeout
+{{ if not .matchmaker_redis.oslo.messaging.wait_timeout }}#{{ end }}wait_timeout = {{ .matchmaker_redis.oslo.messaging.wait_timeout | default "2000" }}
+
+# Time in ms to wait before the transaction is killed. (integer value)
+# from .matchmaker_redis.oslo.messaging.check_timeout
+{{ if not .matchmaker_redis.oslo.messaging.check_timeout }}#{{ end }}check_timeout = {{ .matchmaker_redis.oslo.messaging.check_timeout | default "20000" }}
+
+# Timeout in ms on blocking socket operations (integer value)
+# from .matchmaker_redis.oslo.messaging.socket_timeout
+{{ if not .matchmaker_redis.oslo.messaging.socket_timeout }}#{{ end }}socket_timeout = {{ .matchmaker_redis.oslo.messaging.socket_timeout | default "10000" }}
+
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# Name for the AMQP container. must be globally unique. Defaults to a generated UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
+# from .oslo_messaging_amqp.oslo.messaging.container_name
+{{ if not .oslo_messaging_amqp.oslo.messaging.container_name }}#{{ end }}container_name = {{ .oslo_messaging_amqp.oslo.messaging.container_name | default "<None>" }}
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+# from .oslo_messaging_amqp.oslo.messaging.idle_timeout
+{{ if not .oslo_messaging_amqp.oslo.messaging.idle_timeout }}#{{ end }}idle_timeout = {{ .oslo_messaging_amqp.oslo.messaging.idle_timeout | default "0" }}
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+# from .oslo_messaging_amqp.oslo.messaging.trace
+{{ if not .oslo_messaging_amqp.oslo.messaging.trace }}#{{ end }}trace = {{ .oslo_messaging_amqp.oslo.messaging.trace | default "false" }}
+
+# CA certificate PEM file to verify server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+# from .oslo_messaging_amqp.oslo.messaging.ssl_ca_file
+{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_ca_file }}#{{ end }}ssl_ca_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_ca_file | default "" }}
+
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+# from .oslo_messaging_amqp.oslo.messaging.ssl_cert_file
+{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_cert_file }}#{{ end }}ssl_cert_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_cert_file | default "" }}
+
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+# from .oslo_messaging_amqp.oslo.messaging.ssl_key_file
+{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_key_file }}#{{ end }}ssl_key_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_key_file | default "" }}
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+# from .oslo_messaging_amqp.oslo.messaging.ssl_key_password
+{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_key_password }}#{{ end }}ssl_key_password = {{ .oslo_messaging_amqp.oslo.messaging.ssl_key_password | default "<None>" }}
+
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+# from .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients
+{{ if not .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients }}#{{ end }}allow_insecure_clients = {{ .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients | default "false" }}
+
+# Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
+# from .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms
+{{ if not .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms }}#{{ end }}sasl_mechanisms = {{ .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms | default "" }}
+
+# Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
+# from .oslo_messaging_amqp.oslo.messaging.sasl_config_dir
+{{ if not .oslo_messaging_amqp.oslo.messaging.sasl_config_dir }}#{{ end }}sasl_config_dir = {{ .oslo_messaging_amqp.oslo.messaging.sasl_config_dir | default "" }}
+
+# Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
+# from .oslo_messaging_amqp.oslo.messaging.sasl_config_name
+{{ if not .oslo_messaging_amqp.oslo.messaging.sasl_config_name }}#{{ end }}sasl_config_name = {{ .oslo_messaging_amqp.oslo.messaging.sasl_config_name | default "" }}
+
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
+# from .oslo_messaging_amqp.oslo.messaging.username
+{{ if not .oslo_messaging_amqp.oslo.messaging.username }}#{{ end }}username = {{ .oslo_messaging_amqp.oslo.messaging.username | default "" }}
+
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
+# from .oslo_messaging_amqp.oslo.messaging.password
+{{ if not .oslo_messaging_amqp.oslo.messaging.password }}#{{ end }}password = {{ .oslo_messaging_amqp.oslo.messaging.password | default "" }}
+
+# Seconds to pause before attempting to re-connect. (integer value)
+# Minimum value: 1
+# from .oslo_messaging_amqp.oslo.messaging.connection_retry_interval
+{{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_interval }}#{{ end }}connection_retry_interval = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_interval | default "1" }}
+
+# Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt. (integer value)
+# Minimum value: 0
+# from .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff
+{{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff }}#{{ end }}connection_retry_backoff = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff | default "2" }}
+
+# Maximum limit for connection_retry_interval + connection_retry_backoff (integer value)
+# Minimum value: 1
+# from .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max
+{{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max }}#{{ end }}connection_retry_interval_max = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max | default "30" }}
+
+# Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error. (integer value)
+# Minimum value: 1
+# from .oslo_messaging_amqp.oslo.messaging.link_retry_delay
+{{ if not .oslo_messaging_amqp.oslo.messaging.link_retry_delay }}#{{ end }}link_retry_delay = {{ .oslo_messaging_amqp.oslo.messaging.link_retry_delay | default "10" }}
+
+# The deadline for an rpc reply message delivery. Only used when caller does not provide a timeout expiry. (integer
+# value)
+# Minimum value: 5
+# from .oslo_messaging_amqp.oslo.messaging.default_reply_timeout
+{{ if not .oslo_messaging_amqp.oslo.messaging.default_reply_timeout }}#{{ end }}default_reply_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_reply_timeout | default "30" }}
+
+# The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.
+# (integer value)
+# Minimum value: 5
+# from .oslo_messaging_amqp.oslo.messaging.default_send_timeout
+{{ if not .oslo_messaging_amqp.oslo.messaging.default_send_timeout }}#{{ end }}default_send_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_send_timeout | default "30" }}
+
+# The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.
+# (integer value)
+# Minimum value: 5
+# from .oslo_messaging_amqp.oslo.messaging.default_notify_timeout
+{{ if not .oslo_messaging_amqp.oslo.messaging.default_notify_timeout }}#{{ end }}default_notify_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_notify_timeout | default "30" }}
+
+# Indicates the addressing mode used by the driver.
+# Permitted values:
+# 'legacy'   - use legacy non-routable addressing
+# 'routable' - use routable addresses
+# 'dynamic'  - use legacy addresses if the message bus does not support routing otherwise use routable addressing
+# (string value)
+# from .oslo_messaging_amqp.oslo.messaging.addressing_mode
+{{ if not .oslo_messaging_amqp.oslo.messaging.addressing_mode }}#{{ end }}addressing_mode = {{ .oslo_messaging_amqp.oslo.messaging.addressing_mode | default "dynamic" }}
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+# from .oslo_messaging_amqp.oslo.messaging.server_request_prefix
+{{ if not .oslo_messaging_amqp.oslo.messaging.server_request_prefix }}#{{ end }}server_request_prefix = {{ .oslo_messaging_amqp.oslo.messaging.server_request_prefix | default "exclusive" }}
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+# from .oslo_messaging_amqp.oslo.messaging.broadcast_prefix
+{{ if not .oslo_messaging_amqp.oslo.messaging.broadcast_prefix }}#{{ end }}broadcast_prefix = {{ .oslo_messaging_amqp.oslo.messaging.broadcast_prefix | default "broadcast" }}
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+# from .oslo_messaging_amqp.oslo.messaging.group_request_prefix
+{{ if not .oslo_messaging_amqp.oslo.messaging.group_request_prefix }}#{{ end }}group_request_prefix = {{ .oslo_messaging_amqp.oslo.messaging.group_request_prefix | default "unicast" }}
+
+# Address prefix for all generated RPC addresses (string value)
+# from .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix
+{{ if not .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix }}#{{ end }}rpc_address_prefix = {{ .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix | default "openstack.org/om/rpc" }}
+
+# Address prefix for all generated Notification addresses (string value)
+# from .oslo_messaging_amqp.oslo.messaging.notify_address_prefix
+{{ if not .oslo_messaging_amqp.oslo.messaging.notify_address_prefix }}#{{ end }}notify_address_prefix = {{ .oslo_messaging_amqp.oslo.messaging.notify_address_prefix | default "openstack.org/om/notify" }}
+
+# Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.
+# (string value)
+# from .oslo_messaging_amqp.oslo.messaging.multicast_address
+{{ if not .oslo_messaging_amqp.oslo.messaging.multicast_address }}#{{ end }}multicast_address = {{ .oslo_messaging_amqp.oslo.messaging.multicast_address | default "multicast" }}
+
+# Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to
+# identify messages sent to a single destination. (string value)
+# from .oslo_messaging_amqp.oslo.messaging.unicast_address
+{{ if not .oslo_messaging_amqp.oslo.messaging.unicast_address }}#{{ end }}unicast_address = {{ .oslo_messaging_amqp.oslo.messaging.unicast_address | default "unicast" }}
+
+# Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages
+# that should be delivered in a round-robin fashion across consumers. (string value)
+# from .oslo_messaging_amqp.oslo.messaging.anycast_address
+{{ if not .oslo_messaging_amqp.oslo.messaging.anycast_address }}#{{ end }}anycast_address = {{ .oslo_messaging_amqp.oslo.messaging.anycast_address | default "anycast" }}
+
+# Exchange name used in notification addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_notification_exchange if set
+# else control_exchange if set
+# else 'notify' (string value)
+# from .oslo_messaging_amqp.oslo.messaging.default_notification_exchange
+{{ if not .oslo_messaging_amqp.oslo.messaging.default_notification_exchange }}#{{ end }}default_notification_exchange = {{ .oslo_messaging_amqp.oslo.messaging.default_notification_exchange | default "<None>" }}
+
+# Exchange name used in RPC addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_rpc_exchange if set
+# else control_exchange if set
+# else 'rpc' (string value)
+# from .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange
+{{ if not .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange }}#{{ end }}default_rpc_exchange = {{ .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange | default "<None>" }}
+
+# Window size for incoming RPC Reply messages. (integer value)
+# Minimum value: 1
+# from .oslo_messaging_amqp.oslo.messaging.reply_link_credit
+{{ if not .oslo_messaging_amqp.oslo.messaging.reply_link_credit }}#{{ end }}reply_link_credit = {{ .oslo_messaging_amqp.oslo.messaging.reply_link_credit | default "200" }}
+
+# Window size for incoming RPC Request messages (integer value)
+# Minimum value: 1
+# from .oslo_messaging_amqp.oslo.messaging.rpc_server_credit
+{{ if not .oslo_messaging_amqp.oslo.messaging.rpc_server_credit }}#{{ end }}rpc_server_credit = {{ .oslo_messaging_amqp.oslo.messaging.rpc_server_credit | default "100" }}
+
+# Window size for incoming Notification messages (integer value)
+# Minimum value: 1
+# from .oslo_messaging_amqp.oslo.messaging.notify_server_credit
+{{ if not .oslo_messaging_amqp.oslo.messaging.notify_server_credit }}#{{ end }}notify_server_credit = {{ .oslo_messaging_amqp.oslo.messaging.notify_server_credit | default "100" }}
+
+
+[oslo_messaging_notifications]
+
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop
+# (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+# from .oslo_messaging_notifications.oslo.messaging.driver (multiopt)
+{{ if not .oslo_messaging_notifications.oslo.messaging.driver }}#driver = {{ .oslo_messaging_notifications.oslo.messaging.driver | default "" }}{{ else }}{{ range .oslo_messaging_notifications.oslo.messaging.driver }}driver = {{ . }}{{ end }}{{ end }}
+
+# A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration
+# used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+# from .oslo_messaging_notifications.oslo.messaging.transport_url
+{{ if not .oslo_messaging_notifications.oslo.messaging.transport_url }}#{{ end }}transport_url = {{ .oslo_messaging_notifications.oslo.messaging.transport_url | default "<None>" }}
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+# from .oslo_messaging_notifications.oslo.messaging.topics
+{{ if not .oslo_messaging_notifications.oslo.messaging.topics }}#{{ end }}topics = {{ .oslo_messaging_notifications.oslo.messaging.topics | default "notifications" }}
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+# from .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues
+{{ if not .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues }}#{{ end }}amqp_durable_queues = {{ .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues | default "false" }}
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+# from .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete
+{{ if not .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete }}#{{ end }}amqp_auto_delete = {{ .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete | default "false" }}
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2
+# may be available on some distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version
+{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version }}#{{ end }}kombu_ssl_version = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version | default "" }}
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile
+{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile }}#{{ end }}kombu_ssl_keyfile = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile | default "" }}
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile
+{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile }}#{{ end }}kombu_ssl_certfile = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile | default "" }}
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs
+{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs }}#{{ end }}kombu_ssl_ca_certs = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs | default "" }}
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+# from .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay
+{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay }}#{{ end }}kombu_reconnect_delay = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay | default "1.0" }}
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be
+# available in future versions. (string value)
+# from .oslo_messaging_rabbit.oslo.messaging.kombu_compression
+{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_compression }}#{{ end }}kombu_compression = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_compression | default "<None>" }}
+
+# How long to wait a missing client before abandoning to send it its replies. This value should not be longer than
+# rpc_response_timeout. (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+# from .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout
+{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout }}#{{ end }}kombu_missing_consumer_retry_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout | default "60" }}
+
+# Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable.
+# Takes effect only if more than one RabbitMQ node is provided in config. (string value)
+# Allowed values: round-robin, shuffle
+# from .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy
+{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy }}#{{ end }}kombu_failover_strategy = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy | default "round-robin" }}
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_host
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_host }}#{{ end }}rabbit_host = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_host | default "localhost" }}
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_port
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_port }}#{{ end }}rabbit_port = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_port | default "5672" }}
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts }}#{{ end }}rabbit_hosts = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts | default "$rabbit_host:$rabbit_port" }}
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl }}#{{ end }}rabbit_use_ssl = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl | default "false" }}
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_userid
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_userid }}#{{ end }}rabbit_userid = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_userid | default "guest" }}
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_password
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_password }}#{{ end }}rabbit_password = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_password | default "guest" }}
+
+# The RabbitMQ login method. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method }}#{{ end }}rabbit_login_method = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method | default "AMQPLAIN" }}
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host }}#{{ end }}rabbit_virtual_host = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host | default "/" }}
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval }}#{{ end }}rabbit_retry_interval = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval | default "1" }}
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff }}#{{ end }}rabbit_retry_backoff = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff | default "2" }}
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds. (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max }}#{{ end }}rabbit_interval_max = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max | default "30" }}
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries }}#{{ end }}rabbit_max_retries = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries | default "0" }}
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database.
+# In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you
+# just want to make sure that all queues (except  those with auto-generated names) are mirrored across all nodes, run:
+# "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues }}#{{ end }}rabbit_ha_queues = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues | default "false" }}
+
+# Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration
+# of the TTL are automatically deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl }}#{{ end }}rabbit_transient_queues_ttl = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl | default "1800" }}
+
+# Specifies the number of messages to prefetch. Setting to zero allows unlimited messages. (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count }}#{{ end }}rabbit_qos_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count | default "0" }}
+
+# Number of seconds after which the Rabbit broker is considered down if heartbeat's keep-alive fails (0 disable the
+# heartbeat). EXPERIMENTAL (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold
+{{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold }}#{{ end }}heartbeat_timeout_threshold = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold | default "60" }}
+
+# How often times during the heartbeat_timeout_threshold we check the heartbeat. (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate
+{{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate }}#{{ end }}heartbeat_rate = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate | default "2" }}
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+# from .oslo_messaging_rabbit.oslo.messaging.fake_rabbit
+{{ if not .oslo_messaging_rabbit.oslo.messaging.fake_rabbit }}#{{ end }}fake_rabbit = {{ .oslo_messaging_rabbit.oslo.messaging.fake_rabbit | default "false" }}
+
+# Maximum number of channels to allow (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.channel_max
+{{ if not .oslo_messaging_rabbit.oslo.messaging.channel_max }}#{{ end }}channel_max = {{ .oslo_messaging_rabbit.oslo.messaging.channel_max | default "<None>" }}
+
+# The maximum byte size for an AMQP frame (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.frame_max
+{{ if not .oslo_messaging_rabbit.oslo.messaging.frame_max }}#{{ end }}frame_max = {{ .oslo_messaging_rabbit.oslo.messaging.frame_max | default "<None>" }}
+
+# How often to send heartbeats for consumer's connections (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval
+{{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval }}#{{ end }}heartbeat_interval = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval | default "3" }}
+
+# Enable SSL (boolean value)
+# from .oslo_messaging_rabbit.oslo.messaging.ssl
+{{ if not .oslo_messaging_rabbit.oslo.messaging.ssl }}#{{ end }}ssl = {{ .oslo_messaging_rabbit.oslo.messaging.ssl | default "<None>" }}
+
+# Arguments passed to ssl.wrap_socket (dict value)
+# from .oslo_messaging_rabbit.oslo.messaging.ssl_options
+{{ if not .oslo_messaging_rabbit.oslo.messaging.ssl_options }}#{{ end }}ssl_options = {{ .oslo_messaging_rabbit.oslo.messaging.ssl_options | default "<None>" }}
+
+# Set socket timeout in seconds for connection's socket (floating point value)
+# from .oslo_messaging_rabbit.oslo.messaging.socket_timeout
+{{ if not .oslo_messaging_rabbit.oslo.messaging.socket_timeout }}#{{ end }}socket_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.socket_timeout | default "0.25" }}
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point value)
+# from .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout
+{{ if not .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout }}#{{ end }}tcp_user_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout | default "0.25" }}
+
+# Set delay for reconnection to some host which has connection error (floating point value)
+# from .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay
+{{ if not .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay }}#{{ end }}host_connection_reconnect_delay = {{ .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay | default "0.25" }}
+
+# Connection factory implementation (string value)
+# Allowed values: new, single, read_write
+# from .oslo_messaging_rabbit.oslo.messaging.connection_factory
+{{ if not .oslo_messaging_rabbit.oslo.messaging.connection_factory }}#{{ end }}connection_factory = {{ .oslo_messaging_rabbit.oslo.messaging.connection_factory | default "single" }}
+
+# Maximum number of connections to keep queued. (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.pool_max_size
+{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_max_size }}#{{ end }}pool_max_size = {{ .oslo_messaging_rabbit.oslo.messaging.pool_max_size | default "30" }}
+
+# Maximum number of connections to create above `pool_max_size`. (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow
+{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow }}#{{ end }}pool_max_overflow = {{ .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow | default "0" }}
+
+# Default number of seconds to wait for a connections to available (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.pool_timeout
+{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_timeout }}#{{ end }}pool_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.pool_timeout | default "30" }}
+
+# Lifetime of a connection (since creation) in seconds or None for no recycling. Expired connections are closed on
+# acquire. (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.pool_recycle
+{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_recycle }}#{{ end }}pool_recycle = {{ .oslo_messaging_rabbit.oslo.messaging.pool_recycle | default "600" }}
+
+# Threshold at which inactive (since release) connections are considered stale in seconds or None for no staleness.
+# Stale connections are closed on acquire. (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.pool_stale
+{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_stale }}#{{ end }}pool_stale = {{ .oslo_messaging_rabbit.oslo.messaging.pool_stale | default "60" }}
+
+# Persist notification messages. (boolean value)
+# from .oslo_messaging_rabbit.oslo.messaging.notification_persistence
+{{ if not .oslo_messaging_rabbit.oslo.messaging.notification_persistence }}#{{ end }}notification_persistence = {{ .oslo_messaging_rabbit.oslo.messaging.notification_persistence | default "false" }}
+
+# Exchange name for sending notifications (string value)
+# from .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange
+{{ if not .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange }}#{{ end }}default_notification_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange | default "${control_exchange}_notification" }}
+
+# Max number of not acknowledged message which RabbitMQ can send to notification listener. (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count
+{{ if not .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count }}#{{ end }}notification_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count | default "100" }}
+
+# Reconnecting retry count in case of connectivity problem during sending notification, -1 means infinite retry.
+# (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts
+{{ if not .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts }}#{{ end }}default_notification_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts | default "-1" }}
+
+# Reconnecting retry delay in case of connectivity problem during sending notification message (floating point value)
+# from .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay
+{{ if not .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay }}#{{ end }}notification_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay | default "0.25" }}
+
+# Time to live for rpc queues without consumers in seconds. (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration }}#{{ end }}rpc_queue_expiration = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration | default "60" }}
+
+# Exchange name for sending RPC messages (string value)
+# from .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange
+{{ if not .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange }}#{{ end }}default_rpc_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange | default "${control_exchange}_rpc" }}
+
+# Exchange name for receiving RPC replies (string value)
+# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange }}#{{ end }}rpc_reply_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange | default "${control_exchange}_rpc_reply" }}
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc listener. (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count }}#{{ end }}rpc_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count | default "100" }}
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc reply listener. (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count }}#{{ end }}rpc_reply_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count | default "100" }}
+
+# Reconnecting retry count in case of connectivity problem during sending reply. -1 means infinite retry during
+# rpc_timeout (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts }}#{{ end }}rpc_reply_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts | default "-1" }}
+
+# Reconnecting retry delay in case of connectivity problem during sending reply. (floating point value)
+# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay }}#{{ end }}rpc_reply_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay | default "0.25" }}
+
+# Reconnecting retry count in case of connectivity problem during sending RPC message, -1 means infinite retry. If
+# actual retry attempts in not 0 the rpc request could be processed more then one time (integer value)
+# from .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts
+{{ if not .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts }}#{{ end }}default_rpc_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts | default "-1" }}
+
+# Reconnecting retry delay in case of connectivity problem during sending RPC message (floating point value)
+# from .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay
+{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay }}#{{ end }}rpc_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay | default "0.25" }}
+
+
+[oslo_messaging_zmq]
+
+#
+# From oslo.messaging
+#
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or
+# resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address
+{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address }}#{{ end }}rpc_zmq_bind_address = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address | default "*" }}
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker
+{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker }}#{{ end }}rpc_zmq_matchmaker = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker | default "redis" }}
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts
+{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts }}#{{ end }}rpc_zmq_contexts = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts | default "1" }}
+
+# Maximum number of ingress messages to locally buffer per topic. Default is unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog
+{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog }}#{{ end }}rpc_zmq_topic_backlog = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog | default "<None>" }}
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir
+{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir }}#{{ end }}rpc_zmq_ipc_dir = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir | default "/var/run/openstack" }}
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova. (string
+# value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host
+{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host }}#{{ end }}rpc_zmq_host = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host | default "localhost" }}
+
+# Seconds to wait before a cast expires (TTL). The default value of -1 specifies an infinite linger period. The value
+# of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Only
+# supported by impl_zmq. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+# from .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout
+{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout }}#{{ end }}rpc_cast_timeout = {{ .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout | default "-1" }}
+
+# The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+# from .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout
+{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout }}#{{ end }}rpc_poll_timeout = {{ .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout | default "1" }}
+
+# Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+# from .oslo_messaging_zmq.oslo.messaging.zmq_target_expire
+{{ if not .oslo_messaging_zmq.oslo.messaging.zmq_target_expire }}#{{ end }}zmq_target_expire = {{ .oslo_messaging_zmq.oslo.messaging.zmq_target_expire | default "300" }}
+
+# Update period in seconds of a name service record about existing target. (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+# from .oslo_messaging_zmq.oslo.messaging.zmq_target_update
+{{ if not .oslo_messaging_zmq.oslo.messaging.zmq_target_update }}#{{ end }}zmq_target_update = {{ .oslo_messaging_zmq.oslo.messaging.zmq_target_update | default "180" }}
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+# from .oslo_messaging_zmq.oslo.messaging.use_pub_sub
+{{ if not .oslo_messaging_zmq.oslo.messaging.use_pub_sub }}#{{ end }}use_pub_sub = {{ .oslo_messaging_zmq.oslo.messaging.use_pub_sub | default "true" }}
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+# from .oslo_messaging_zmq.oslo.messaging.use_router_proxy
+{{ if not .oslo_messaging_zmq.oslo.messaging.use_router_proxy }}#{{ end }}use_router_proxy = {{ .oslo_messaging_zmq.oslo.messaging.use_router_proxy | default "true" }}
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port
+{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port }}#{{ end }}rpc_zmq_min_port = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port | default "49153" }}
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port
+{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port }}#{{ end }}rpc_zmq_max_port = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port | default "65536" }}
+
+# Number of retries to find free port number before fail with ZMQBindError. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries
+{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries }}#{{ end }}rpc_zmq_bind_port_retries = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries | default "100" }}
+
+# Default serialization mechanism for serializing/deserializing outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization
+{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization }}#{{ end }}rpc_zmq_serialization = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization | default "json" }}
+
+# This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects.
+# False means to keep queue and messages even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+# from .oslo_messaging_zmq.oslo.messaging.zmq_immediate
+{{ if not .oslo_messaging_zmq.oslo.messaging.zmq_immediate }}#{{ end }}zmq_immediate = {{ .oslo_messaging_zmq.oslo.messaging.zmq_immediate | default "false" }}
+
+
+[oslo_policy]
+
+#
+# From oslo.policy
+#
+
+# The JSON file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
+# from .oslo_policy.oslo.policy.policy_file
+{{ if not .oslo_policy.oslo.policy.policy_file }}#{{ end }}policy_file = {{ .oslo_policy.oslo.policy.policy_file | default "policy.json" }}
+
+# Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+# from .oslo_policy.oslo.policy.policy_default_rule
+{{ if not .oslo_policy.oslo.policy.policy_default_rule }}#{{ end }}policy_default_rule = {{ .oslo_policy.oslo.policy.policy_default_rule | default "default" }}
+
+# Directories where policy configuration files are stored. They can be relative to any directory in the search path
+# defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories
+# to be searched.  Missing or empty directories are ignored. (multi valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
+# from .oslo_policy.oslo.policy.policy_dirs (multiopt)
+{{ if not .oslo_policy.oslo.policy.policy_dirs }}#policy_dirs = {{ .oslo_policy.oslo.policy.policy_dirs | default "policy.d" }}{{ else }}{{ range .oslo_policy.oslo.policy.policy_dirs }}policy_dirs = {{ . }}{{ end }}{{ end }}
+
+
+[revision]
+
+#
+# From senlin.config
+#
+
+# Senlin API revision. (string value)
+# from .revision.senlin.config.senlin_api_revision
+{{ if not .revision.senlin.config.senlin_api_revision }}#{{ end }}senlin_api_revision = {{ .revision.senlin.config.senlin_api_revision | default "1.0" }}
+
+# Senlin engine revision. (string value)
+# from .revision.senlin.config.senlin_engine_revision
+{{ if not .revision.senlin.config.senlin_engine_revision }}#{{ end }}senlin_engine_revision = {{ .revision.senlin.config.senlin_engine_revision | default "1.0" }}
+
+
+[senlin_api]
+
+#
+# From senlin.config
+#
+
+# Address to bind the server. Useful when selecting a particular network interface. (IP address value)
+# from .senlin_api.senlin.config.bind_host
+{{ if not .senlin_api.senlin.config.bind_host }}#{{ end }}bind_host = {{ .senlin_api.senlin.config.bind_host | default "0.0.0.0" }}
+
+# The port on which the server will listen. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# from .senlin_api.senlin.config.bind_port
+{{ if not .senlin_api.senlin.config.bind_port }}#{{ end }}bind_port = {{ .senlin_api.senlin.config.bind_port | default "8778" }}
+
+# Number of backlog requests to configure the socket with. (integer value)
+# from .senlin_api.senlin.config.backlog
+{{ if not .senlin_api.senlin.config.backlog }}#{{ end }}backlog = {{ .senlin_api.senlin.config.backlog | default "4096" }}
+
+# Location of the SSL certificate file to use for SSL mode. (string value)
+# from .senlin_api.senlin.config.cert_file
+{{ if not .senlin_api.senlin.config.cert_file }}#{{ end }}cert_file = {{ .senlin_api.senlin.config.cert_file | default "<None>" }}
+
+# Location of the SSL key file to use for enabling SSL mode. (string value)
+# from .senlin_api.senlin.config.key_file
+{{ if not .senlin_api.senlin.config.key_file }}#{{ end }}key_file = {{ .senlin_api.senlin.config.key_file | default "<None>" }}
+
+# Number of workers for Senlin service. (integer value)
+# from .senlin_api.senlin.config.workers
+{{ if not .senlin_api.senlin.config.workers }}#{{ end }}workers = {{ .senlin_api.senlin.config.workers | default "0" }}
+
+# Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens
+# (typically those generated by the Keystone v3 API with big service catalogs). (integer value)
+# from .senlin_api.senlin.config.max_header_line
+{{ if not .senlin_api.senlin.config.max_header_line }}#{{ end }}max_header_line = {{ .senlin_api.senlin.config.max_header_line | default "16384" }}
+
+# The value for the socket option TCP_KEEPIDLE.  This is the time in seconds that the connection must be idle before
+# TCP starts sending keepalive probes. (integer value)
+# from .senlin_api.senlin.config.tcp_keepidle
+{{ if not .senlin_api.senlin.config.tcp_keepidle }}#{{ end }}tcp_keepidle = {{ .senlin_api.senlin.config.tcp_keepidle | default "600" }}
+
+# The API paste config file to use. (string value)
+# Deprecated group/name - [paste_deploy]/api_paste_config
+# from .senlin_api.senlin.config.api_paste_config
+{{ if not .senlin_api.senlin.config.api_paste_config }}#{{ end }}api_paste_config = {{ .senlin_api.senlin.config.api_paste_config | default "api-paste.ini" }}
+
+# If false, closes the client socket explicitly. (boolean value)
+# Deprecated group/name - [eventlet_opts]/wsgi_keep_alive
+# from .senlin_api.senlin.config.wsgi_keep_alive
+{{ if not .senlin_api.senlin.config.wsgi_keep_alive }}#{{ end }}wsgi_keep_alive = {{ .senlin_api.senlin.config.wsgi_keep_alive | default "true" }}
+
+# Timeout for client connections' socket operations. If an incoming connection is idle for this number of seconds it
+# will be closed. A value of '0' indicates waiting forever. (integer value)
+# Deprecated group/name - [eventlet_opts]/client_socket_timeout
+# from .senlin_api.senlin.config.client_socket_timeout
+{{ if not .senlin_api.senlin.config.client_socket_timeout }}#{{ end }}client_socket_timeout = {{ .senlin_api.senlin.config.client_socket_timeout | default "900" }}
+
+# Maximum raw byte size of JSON request body. Should be larger than max_template_size. (integer value)
+# Deprecated group/name - [DEFAULT]/max_json_body_size
+# from .senlin_api.senlin.config.max_json_body_size
+{{ if not .senlin_api.senlin.config.max_json_body_size }}#{{ end }}max_json_body_size = {{ .senlin_api.senlin.config.max_json_body_size | default "1048576" }}
+
+
+[ssl]
+
+#
+# From oslo.service.sslutils
+#
+
+# CA certificate file to use to verify connecting clients. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
+# from .ssl.oslo.service.sslutils.ca_file
+{{ if not .ssl.oslo.service.sslutils.ca_file }}#{{ end }}ca_file = {{ .ssl.oslo.service.sslutils.ca_file | default "<None>" }}
+
+# Certificate file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+# from .ssl.oslo.service.sslutils.cert_file
+{{ if not .ssl.oslo.service.sslutils.cert_file }}#{{ end }}cert_file = {{ .ssl.oslo.service.sslutils.cert_file | default "<None>" }}
+
+# Private key file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+# from .ssl.oslo.service.sslutils.key_file
+{{ if not .ssl.oslo.service.sslutils.key_file }}#{{ end }}key_file = {{ .ssl.oslo.service.sslutils.key_file | default "<None>" }}
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2
+# may be available on some distributions. (string value)
+# from .ssl.oslo.service.sslutils.version
+{{ if not .ssl.oslo.service.sslutils.version }}#{{ end }}version = {{ .ssl.oslo.service.sslutils.version | default "<None>" }}
+
+# Sets the list of available ciphers. value should be a string in the OpenSSL cipher list format. (string value)
+# from .ssl.oslo.service.sslutils.ciphers
+{{ if not .ssl.oslo.service.sslutils.ciphers }}#{{ end }}ciphers = {{ .ssl.oslo.service.sslutils.ciphers | default "<None>" }}
+
+
+[webhook]
+
+#
+# From senlin.config
+#
+
+# Address for invoking webhooks. It is useful for cases where proxies are used for triggering webhooks. Default to the
+# hostname of the API node. (string value)
+# from .webhook.senlin.config.host
+{{ if not .webhook.senlin.config.host }}#{{ end }}host = {{ .webhook.senlin.config.host | default "<None>" }}
+
+# The port on which a webhook will be invoked. Useful when service is running behind a proxy. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# from .webhook.senlin.config.port
+{{ if not .webhook.senlin.config.port }}#{{ end }}port = {{ .webhook.senlin.config.port | default "8778" }}
+
+
+[zaqar]
+
+#
+# From senlin.config
+#
+
+# Authentication type to load (string value)
+# Deprecated group/name - [zaqar]/auth_plugin
+# from .zaqar.senlin.config.auth_type
+{{ if not .zaqar.senlin.config.auth_type }}#{{ end }}auth_type = {{ .zaqar.senlin.config.auth_type | default "<None>" }}
+
+# Config Section from which to load plugin specific options (string value)
+# from .zaqar.senlin.config.auth_section
+{{ if not .zaqar.senlin.config.auth_section }}#{{ end }}auth_section = {{ .zaqar.senlin.config.auth_section | default "<None>" }}
+
+# Authentication URL (string value)
+# from .zaqar.senlin.config.auth_url
+{{ if not .zaqar.senlin.config.auth_url }}#{{ end }}auth_url = {{ .zaqar.senlin.config.auth_url | default "<None>" }}
+
+# Domain ID to scope to (string value)
+# from .zaqar.senlin.config.domain_id
+{{ if not .zaqar.senlin.config.domain_id }}#{{ end }}domain_id = {{ .zaqar.senlin.config.domain_id | default "<None>" }}
+
+# Domain name to scope to (string value)
+# from .zaqar.senlin.config.domain_name
+{{ if not .zaqar.senlin.config.domain_name }}#{{ end }}domain_name = {{ .zaqar.senlin.config.domain_name | default "<None>" }}
+
+# Project ID to scope to (string value)
+# Deprecated group/name - [zaqar]/tenant-id
+# from .zaqar.senlin.config.project_id
+{{ if not .zaqar.senlin.config.project_id }}#{{ end }}project_id = {{ .zaqar.senlin.config.project_id | default "<None>" }}
+
+# Project name to scope to (string value)
+# Deprecated group/name - [zaqar]/tenant-name
+# from .zaqar.senlin.config.project_name
+{{ if not .zaqar.senlin.config.project_name }}#{{ end }}project_name = {{ .zaqar.senlin.config.project_name | default "<None>" }}
+
+# Domain ID containing project (string value)
+# from .zaqar.senlin.config.project_domain_id
+{{ if not .zaqar.senlin.config.project_domain_id }}#{{ end }}project_domain_id = {{ .zaqar.senlin.config.project_domain_id | default "<None>" }}
+
+# Domain name containing project (string value)
+# from .zaqar.senlin.config.project_domain_name
+{{ if not .zaqar.senlin.config.project_domain_name }}#{{ end }}project_domain_name = {{ .zaqar.senlin.config.project_domain_name | default "<None>" }}
+
+# Trust ID (string value)
+# from .zaqar.senlin.config.trust_id
+{{ if not .zaqar.senlin.config.trust_id }}#{{ end }}trust_id = {{ .zaqar.senlin.config.trust_id | default "<None>" }}
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and
+# ignored in v2 authentication. (string value)
+# from .zaqar.senlin.config.default_domain_id
+{{ if not .zaqar.senlin.config.default_domain_id }}#{{ end }}default_domain_id = {{ .zaqar.senlin.config.default_domain_id | default "<None>" }}
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3
+# and ignored in v2 authentication. (string value)
+# from .zaqar.senlin.config.default_domain_name
+{{ if not .zaqar.senlin.config.default_domain_name }}#{{ end }}default_domain_name = {{ .zaqar.senlin.config.default_domain_name | default "<None>" }}
+
+# User id (string value)
+# from .zaqar.senlin.config.user_id
+{{ if not .zaqar.senlin.config.user_id }}#{{ end }}user_id = {{ .zaqar.senlin.config.user_id | default "<None>" }}
+
+# Username (string value)
+# Deprecated group/name - [zaqar]/user-name
+# from .zaqar.senlin.config.username
+{{ if not .zaqar.senlin.config.username }}#{{ end }}username = {{ .zaqar.senlin.config.username | default "<None>" }}
+
+# User's domain id (string value)
+# from .zaqar.senlin.config.user_domain_id
+{{ if not .zaqar.senlin.config.user_domain_id }}#{{ end }}user_domain_id = {{ .zaqar.senlin.config.user_domain_id | default "<None>" }}
+
+# User's domain name (string value)
+# from .zaqar.senlin.config.user_domain_name
+{{ if not .zaqar.senlin.config.user_domain_name }}#{{ end }}user_domain_name = {{ .zaqar.senlin.config.user_domain_name | default "<None>" }}
+
+# User's password (string value)
+# from .zaqar.senlin.config.password
+{{ if not .zaqar.senlin.config.password }}#{{ end }}password = {{ .zaqar.senlin.config.password | default "<None>" }}
+
+{{- end -}}
diff --git a/senlin/templates/job-db-init.yaml b/senlin/templates/job-db-init.yaml
new file mode 100644
index 0000000000..ef5afed7b6
--- /dev/null
+++ b/senlin/templates/job-db-init.yaml
@@ -0,0 +1,79 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{{- $envAll := . }}
+{{- $dependencies := .Values.dependencies.init }}
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: senlin-db-init
+spec:
+  template:
+    metadata:
+      annotations:
+        pod.beta.kubernetes.io/init-containers: '[
+{{ tuple $envAll $dependencies "[]" | include "helm-toolkit.kubernetes_entrypoint_init_container" | indent 10 }}
+        ]'
+    spec:
+      restartPolicy: OnFailure
+      nodeSelector:
+        {{ .Values.labels.node_selector_key }}: {{ .Values.labels.node_selector_value }}
+      containers:
+        - name: senlin-db-init
+          image: {{ .Values.images.db_init | quote }}
+          imagePullPolicy: {{ .Values.images.pull_policy | quote }}
+          {{- if .Values.resources.enabled }}
+          resources:
+            requests:
+              memory: {{ .Values.resources.senlin_db_init.requests.memory | quote }}
+              cpu: {{ .Values.resources.senlin_db_init.requests.cpu | quote }}
+            limits:
+              memory: {{ .Values.resources.senlin_db_init.limits.memory | quote }}
+              cpu: {{ .Values.resources.senlin_db_init.limits.cpu | quote }}
+          {{- end }}
+          env:
+            - name: ROOT_DB_CONNECTION
+              valueFrom:
+                secretKeyRef:
+                  name: senlin-db-root
+                  key: DB_CONNECTION
+            - name: OPENSTACK_CONFIG_FILE
+              value: /etc/senlin/senlin.conf
+            - name: OPENSTACK_CONFIG_DB_SECTION
+              value: database
+            - name: OPENSTACK_CONFIG_DB_KEY
+              value: connection
+          command:
+            - python
+            - /tmp/db-init.py
+          volumeMounts:
+            - name: senlin-bin
+              mountPath: /tmp/db-init.py
+              subPath: db-init.py
+              readOnly: true
+            - name: etcsenlin
+              mountPath: /etc/senlin
+            - name: senlin-etc
+              mountPath: /etc/senlin/senlin.conf
+              subPath: senlin.conf
+              readOnly: true
+      volumes:
+        - name: etcsenlin
+          emptyDir: {}
+        - name: senlin-etc
+          configMap:
+            name: senlin-etc
+        - name: senlin-bin
+          configMap:
+            name: senlin-bin
diff --git a/senlin/templates/job-db-sync.yaml b/senlin/templates/job-db-sync.yaml
new file mode 100644
index 0000000000..a2b1af3078
--- /dev/null
+++ b/senlin/templates/job-db-sync.yaml
@@ -0,0 +1,67 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{{- $envAll := . }}
+{{- $dependencies := .Values.dependencies.db_sync }}
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: senlin-db-sync
+spec:
+  template:
+    metadata:
+      annotations:
+        pod.beta.kubernetes.io/init-containers: '[
+{{ tuple $envAll $dependencies "[]" | include "helm-toolkit.kubernetes_entrypoint_init_container" | indent 10 }}
+        ]'
+    spec:
+      restartPolicy: OnFailure
+      nodeSelector:
+        {{ .Values.labels.node_selector_key }}: {{ .Values.labels.node_selector_value }}
+      containers:
+        - name: senlin-db-sync
+          image: {{ .Values.images.db_sync }}
+          imagePullPolicy: {{ .Values.images.pull_policy }}
+          {{- if .Values.resources.enabled }}
+          resources:
+            requests:
+              memory: {{ .Values.resources.senlin_db_sync.requests.memory | quote }}
+              cpu: {{ .Values.resources.senlin_db_sync.requests.cpu | quote }}
+            limits:
+              memory: {{ .Values.resources.senlin_db_sync.limits.memory | quote }}
+              cpu: {{ .Values.resources.senlin_db_sync.limits.cpu | quote }}
+          {{- end }}
+          command:
+            - bash
+            - /tmp/db-sync.sh
+          volumeMounts:
+            - name: senlin-bin
+              mountPath: /tmp/db-sync.sh
+              subPath: db-sync.sh
+              readOnly: true
+            - name: etcsenlin
+              mountPath: /etc/senlin
+            - name: senlin-etc
+              mountPath: /etc/senlin/senlin.conf
+              subPath: senlin.conf
+              readOnly: true
+      volumes:
+        - name: etcsenlin
+          emptyDir: {}
+        - name: senlin-etc
+          configMap:
+            name: senlin-etc
+        - name: senlin-bin
+          configMap:
+            name: senlin-bin
diff --git a/senlin/templates/job-ks-endpoints.yaml b/senlin/templates/job-ks-endpoints.yaml
new file mode 100644
index 0000000000..df66ba1af9
--- /dev/null
+++ b/senlin/templates/job-ks-endpoints.yaml
@@ -0,0 +1,73 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{{- $envAll := . }}
+{{- $ksAdminSecret := .Values.keystone_secrets.admin }}
+{{- $dependencies := .Values.dependencies.ks_endpoints }}
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: senlin-ks-endpoints
+spec:
+  template:
+    metadata:
+      annotations:
+        pod.beta.kubernetes.io/init-containers: '[
+{{ tuple $envAll $dependencies "[]" | include "helm-toolkit.kubernetes_entrypoint_init_container" | indent 10 }}
+        ]'
+    spec:
+      restartPolicy: OnFailure
+      nodeSelector:
+        {{ .Values.labels.node_selector_key }}: {{ .Values.labels.node_selector_value }}
+      containers:
+{{- range $key1, $osServiceType := tuple "clustering" }}
+{{- range $key2, $osServiceEndPoint := tuple "admin" "internal" "public" }}
+        - name: {{ $osServiceType }}-ks-endpoints-{{ $osServiceEndPoint }}
+          image: {{ $envAll.Values.images.ks_endpoints }}
+          imagePullPolicy: {{ $envAll.Values.images.pull_policy }}
+          {{- if $envAll.Values.resources.enabled }}
+          resources:
+            requests:
+              memory: {{ $envAll.Values.resources.senlin_ks_endpoints.requests.memory | quote }}
+              cpu: {{ $envAll.Values.resources.senlin_ks_endpoints.requests.cpu | quote }}
+            limits:
+              memory: {{ $envAll.Values.resources.senlin_ks_endpoints.limits.memory | quote }}
+              cpu: {{ $envAll.Values.resources.senlin_ks_endpoints.limits.cpu | quote }}
+          {{- end }}
+          command:
+            - bash
+            - /tmp/ks-endpoints.sh
+          volumeMounts:
+            - name: ks-endpoints-sh
+              mountPath: /tmp/ks-endpoints.sh
+              subPath: ks-endpoints.sh
+              readOnly: true
+          env:
+{{- with $env := dict "ksUserSecret" $ksAdminSecret }}
+{{- include "helm-toolkit.keystone_openrc_env_vars" $env | indent 12 }}
+{{- end }}
+            - name: OS_SVC_ENDPOINT
+              value: {{ $osServiceEndPoint }}
+            - name: OS_SERVICE_NAME
+              value: {{ tuple $osServiceType $envAll | include "helm-toolkit.keystone_endpoint_name_lookup" }}
+            - name: OS_SERVICE_TYPE
+              value: {{ $osServiceType }}
+            - name: OS_SERVICE_ENDPOINT
+              value: {{ tuple $osServiceType $osServiceEndPoint "api" $envAll | include "helm-toolkit.keystone_endpoint_uri_lookup" }}
+{{- end }}
+{{- end }}
+      volumes:
+        - name: ks-endpoints-sh
+          configMap:
+            name: senlin-bin
diff --git a/senlin/templates/job-ks-service.yaml b/senlin/templates/job-ks-service.yaml
new file mode 100644
index 0000000000..7b3102b7d6
--- /dev/null
+++ b/senlin/templates/job-ks-service.yaml
@@ -0,0 +1,67 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{{- $envAll := . }}
+{{- $ksAdminSecret := .Values.keystone_secrets.admin }}
+{{- $dependencies := .Values.dependencies.ks_service }}
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: senlin-ks-service
+spec:
+  template:
+    metadata:
+      annotations:
+        pod.beta.kubernetes.io/init-containers: '[
+{{ tuple $envAll $dependencies "[]" | include "helm-toolkit.kubernetes_entrypoint_init_container" | indent 10 }}
+        ]'
+    spec:
+      restartPolicy: OnFailure
+      nodeSelector:
+        {{ .Values.labels.node_selector_key }}: {{ .Values.labels.node_selector_value }}
+      containers:
+{{- range $key1, $osServiceType := tuple "clustering" }}
+        - name: {{ $osServiceType }}-ks-service-registration
+          image: {{ $envAll.Values.images.ks_service }}
+          imagePullPolicy: {{ $envAll.Values.images.pull_policy }}
+          {{- if $envAll.Values.resources.enabled }}
+          resources:
+            requests:
+              memory: {{ $envAll.Values.resources.senlin_ks_service.requests.memory | quote }}
+              cpu: {{ $envAll.Values.resources.senlin_ks_service.requests.cpu | quote }}
+            limits:
+              memory: {{ $envAll.Values.resources.senlin_ks_service.limits.memory | quote }}
+              cpu: {{ $envAll.Values.resources.senlin_ks_service.limits.cpu | quote }}
+          {{- end }}
+          command:
+            - bash
+            - /tmp/ks-service.sh
+          volumeMounts:
+            - name: ks-service-sh
+              mountPath: /tmp/ks-service.sh
+              subPath: ks-service.sh
+              readOnly: true
+          env:
+{{- with $env := dict "ksUserSecret" $ksAdminSecret }}
+{{- include "helm-toolkit.keystone_openrc_env_vars" $env | indent 12 }}
+{{- end }}
+            - name: OS_SERVICE_NAME
+              value: {{ tuple $osServiceType $envAll | include "helm-toolkit.keystone_endpoint_name_lookup" }}
+            - name: OS_SERVICE_TYPE
+              value: {{ $osServiceType }}
+{{- end }}
+      volumes:
+        - name: ks-service-sh
+          configMap:
+            name: senlin-bin
diff --git a/senlin/templates/job-ks-user.yaml b/senlin/templates/job-ks-user.yaml
new file mode 100644
index 0000000000..89f6353825
--- /dev/null
+++ b/senlin/templates/job-ks-user.yaml
@@ -0,0 +1,69 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{{- $ksAdminSecret := .Values.keystone.admin_secret | default "senlin-env-keystone-admin" }}
+{{- $ksUserSecret := .Values.keystone.user_secret | default "senlin-env-keystone-user" }}
+{{- $envAll := . }}
+{{- $dependencies := .Values.dependencies.ks_user }}
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: senlin-ks-user
+spec:
+  template:
+    metadata:
+      annotations:
+        pod.beta.kubernetes.io/init-containers: '[
+{{ tuple $envAll $dependencies "[]" | include "helm-toolkit.kubernetes_entrypoint_init_container" | indent 10 }}
+        ]'
+    spec:
+      restartPolicy: OnFailure
+      nodeSelector:
+        {{ .Values.labels.node_selector_key }}: {{ .Values.labels.node_selector_value }}
+      containers:
+        - name: senlin-ks-user
+          image: {{ .Values.images.ks_user }}
+          imagePullPolicy: {{ .Values.images.pull_policy }}
+          {{- if .Values.resources.enabled }}
+          resources:
+            requests:
+              memory: {{ .Values.resources.senlin_ks_user.requests.memory | quote }}
+              cpu: {{ .Values.resources.senlin_ks_user.requests.cpu | quote }}
+            limits:
+              memory: {{ .Values.resources.senlin_ks_user.limits.memory | quote }}
+              cpu: {{ .Values.resources.senlin_ks_user.limits.cpu | quote }}
+          {{- end }}
+          command:
+            - bash
+            - /tmp/ks-user.sh
+          volumeMounts:
+            - name: ks-user-sh
+              mountPath: /tmp/ks-user.sh
+              subPath: ks-user.sh
+              readOnly: true
+          env:
+{{- with $env := dict "ksUserSecret" $ksAdminSecret }}
+{{- include "helm-toolkit.keystone_openrc_env_vars" $env | indent 12 }}
+{{- end }}
+            - name: SERVICE_OS_SERVICE_NAME
+              value: "senlin"
+{{- with $env := dict "ksUserSecret" $ksUserSecret }}
+{{- include "helm-toolkit.keystone_user_create_env_vars" $env | indent 12 }}
+{{- end }}
+            - name: SERVICE_OS_ROLE
+              value: {{ .Values.keystone.senlin_user_role | quote }}
+      volumes:
+        - name: ks-user-sh
+          configMap:
+            name: senlin-bin
diff --git a/senlin/templates/secret-db-root.env.yaml b/senlin/templates/secret-db-root.env.yaml
new file mode 100644
index 0000000000..05257084df
--- /dev/null
+++ b/senlin/templates/secret-db-root.env.yaml
@@ -0,0 +1,7 @@
+apiVersion: v1
+kind: Secret
+metadata:
+  name: senlin-db-root
+type: Opaque
+data:
+  DB_CONNECTION: {{ tuple "oslo_db" "internal" "admin" "mysql" . | include "helm-toolkit.authenticated_endpoint_uri_lookup" | b64enc }}
diff --git a/senlin/templates/secret-keystone-admin.env.yaml b/senlin/templates/secret-keystone-admin.env.yaml
new file mode 100644
index 0000000000..f8d07a4a54
--- /dev/null
+++ b/senlin/templates/secret-keystone-admin.env.yaml
@@ -0,0 +1,34 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Secret
+metadata:
+  name: {{ .Values.keystone_secrets.admin }}
+type: Opaque
+data:
+  OS_AUTH_URL: |
+{{ tuple "identity" "admin" "admin" . | include "helm-toolkit.keystone_endpoint_uri_lookup" | b64enc | indent 4 }}
+  OS_REGION_NAME: |
+{{ .Values.keystone.admin_region_name  | b64enc | indent 4 }}
+  OS_PROJECT_DOMAIN_NAME: |
+{{ .Values.keystone.admin_project_domain  | b64enc | indent 4 }}
+  OS_PROJECT_NAME: |
+{{ .Values.keystone.admin_project_name  | b64enc | indent 4 }}
+  OS_USER_DOMAIN_NAME: |
+{{ .Values.keystone.admin_user_domain  | b64enc | indent 4 }}
+  OS_USERNAME: |
+{{ .Values.keystone.admin_user  | b64enc | indent 4 }}
+  OS_PASSWORD: |
+{{ .Values.keystone.admin_password  | b64enc | indent 4 }}
diff --git a/senlin/templates/secret-keystone-user.env.yaml b/senlin/templates/secret-keystone-user.env.yaml
new file mode 100644
index 0000000000..d6f133d1d6
--- /dev/null
+++ b/senlin/templates/secret-keystone-user.env.yaml
@@ -0,0 +1,34 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Secret
+metadata:
+  name: {{ .Values.keystone_secrets.user }}
+type: Opaque
+data:
+  OS_AUTH_URL: |
+{{ tuple "identity" "internal" "api" . | include "helm-toolkit.keystone_endpoint_uri_lookup" | b64enc | indent 4 }}
+  OS_REGION_NAME: |
+{{ .Values.conf.senlin.keystone_authtoken.keystonemiddleware.auth_token.region_name | b64enc | indent 4 }}
+  OS_PROJECT_DOMAIN_NAME: |
+{{ .Values.conf.senlin.keystone_authtoken.keystonemiddleware.auth_token.project_domain_name | b64enc | indent 4 }}
+  OS_PROJECT_NAME: |
+{{ .Values.conf.senlin.keystone_authtoken.keystonemiddleware.auth_token.project_name | b64enc | indent 4 }}
+  OS_USER_DOMAIN_NAME: |
+{{ .Values.conf.senlin.keystone_authtoken.keystonemiddleware.auth_token.user_domain_name | b64enc | indent 4 }}
+  OS_USERNAME: |
+{{ .Values.conf.senlin.keystone_authtoken.keystonemiddleware.auth_token.username | b64enc | indent 4 }}
+  OS_PASSWORD: |
+{{ .Values.conf.senlin.keystone_authtoken.keystonemiddleware.auth_token.password | b64enc | indent 4 }}
diff --git a/senlin/templates/service-api.yaml b/senlin/templates/service-api.yaml
new file mode 100644
index 0000000000..56eaa44c25
--- /dev/null
+++ b/senlin/templates/service-api.yaml
@@ -0,0 +1,29 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: senlin-api
+spec:
+  ports:
+    - port: {{ .Values.conf.senlin.senlin_api.senlin.config.bind_port }}
+    {{ if .Values.network.api.node_port.enabled }}
+      nodePort: {{ .Values.network.api.node_port.port }}
+    {{ end }}
+  selector:
+    app: senlin-api
+  {{ if .Values.network.api.node_port.enabled }}
+  type: NodePort
+  {{ end }}
diff --git a/senlin/templates/statefulset-engine.yaml b/senlin/templates/statefulset-engine.yaml
new file mode 100644
index 0000000000..22db719763
--- /dev/null
+++ b/senlin/templates/statefulset-engine.yaml
@@ -0,0 +1,82 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{{- $envAll := . }}
+{{- $dependencies := .Values.dependencies.engine }}
+{{- $mounts_senlin_engine := .Values.mounts.senlin_engine.senlin_engine }}
+{{- $mounts_senlin_engine_init := .Values.mounts.senlin_engine.init_container }}
+apiVersion: apps/v1beta1
+kind: StatefulSet
+metadata:
+  name: senlin-engine
+spec:
+  serviceName: senlin-engine
+  replicas: {{ .Values.replicas.engine }}
+  template:
+    metadata:
+      labels:
+        app: senlin-engine
+      annotations:
+        pod.beta.kubernetes.io/init-containers: '[
+{{ tuple $envAll $dependencies $mounts_senlin_engine_init | include "helm-toolkit.kubernetes_entrypoint_init_container" | indent 10 }}
+        ]'
+    spec:
+      nodeSelector:
+        {{ .Values.labels.node_selector_key }}: {{ .Values.labels.node_selector_value }}
+      containers:
+        - name: senlin-engine
+          image: {{ .Values.images.engine }}
+          imagePullPolicy: {{ .Values.images.pull_policy }}
+          {{- if .Values.resources.enabled }}
+          resources:
+            requests:
+              memory: {{ .Values.resources.senlin_engine.requests.memory | quote }}
+              cpu: {{ .Values.resources.senlin_engine.requests.cpu | quote }}
+            limits:
+              memory: {{ .Values.resources.senlin_engine.limits.memory | quote }}
+              cpu: {{ .Values.resources.senlin_engine.limits.cpu | quote }}
+          {{- end }}
+          command:
+            - bash
+            - /tmp/senlin-engine.sh
+          volumeMounts:
+            - name: senlin-bin
+              mountPath: /tmp/senlin-engine.sh
+              subPath: senlin-engine.sh
+              readOnly: true
+            - name: pod-etc-senlin
+              mountPath: /etc/senlin
+            - name: pod-var-cache-senlin
+              mountPath: /var/cache/senlin
+            - name: senlin-etc
+              mountPath: /etc/senlin/senlin.conf
+              subPath: senlin.conf
+              readOnly: true
+            - name: senlin-etc
+              mountPath: /etc/senlin/policy.json
+              subPath: policy.json
+              readOnly: true
+{{ if $mounts_senlin_engine.volumeMounts }}{{ toYaml $mounts_senlin_engine.volumeMounts | indent 12 }}{{ end }}
+      volumes:
+        - name: pod-etc-senlin
+          emptyDir: {}
+        - name: pod-var-cache-senlin
+          emptyDir: {}
+        - name: senlin-bin
+          configMap:
+            name: senlin-bin
+        - name: senlin-etc
+          configMap:
+            name: senlin-etc
+{{ if $mounts_senlin_engine.volumes }}{{ toYaml $mounts_senlin_engine.volumes | indent 8 }}{{ end }}
diff --git a/senlin/values.yaml b/senlin/values.yaml
new file mode 100644
index 0000000000..364f488380
--- /dev/null
+++ b/senlin/values.yaml
@@ -0,0 +1,248 @@
+# Copyright 2017 The Openstack-Helm Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Default values for keystone.
+# This is a YAML-formatted file.
+# Declare name/value pairs to be passed into your templates.
+# name: value
+
+
+replicas:
+  api: 1
+  engine: 1
+
+labels:
+  node_selector_key: openstack-control-plane
+  node_selector_value: enabled
+
+images:
+  db_init: docker.io/kolla/ubuntu-source-senlin-api:3.0.3
+  db_sync: docker.io/kolla/ubuntu-source-senlin-api:3.0.3
+  ks_user: docker.io/kolla/ubuntu-source-kolla-toolbox:3.0.3
+  ks_service: docker.io/kolla/ubuntu-source-kolla-toolbox:3.0.3
+  ks_endpoints: docker.io/kolla/ubuntu-source-kolla-toolbox:3.0.3
+  api: docker.io/kolla/ubuntu-source-senlin-api:3.0.3
+  engine: docker.io/kolla/ubuntu-source-senlin-engine:3.0.3
+  dep_check: docker.io/kolla/ubuntu-source-kubernetes-entrypoint:4.0.0
+  pull_policy: "IfNotPresent"
+
+upgrades:
+  revision_history: 3
+  pod_replacement_strategy: RollingUpdate
+  rolling_update:
+    max_unavailable: 1
+    max_surge: 3
+
+keystone_secrets:
+  admin: "senlin-env-keystone-admin"
+  user: "senlin-env-keystone-user"
+
+keystone:
+  admin_user: "admin"
+  admin_user_domain: "default"
+  admin_password: "password"
+  admin_project_name: "admin"
+  admin_project_domain: "default"
+  admin_region_name: "RegionOne"
+
+  senlin_user_role: "admin"
+
+
+conf:
+  paste:
+    override:
+    append:
+  policy:
+    override:
+    append:
+  senlin:
+    override:
+    append:
+    keystone_authtoken:
+      keystonemiddleware:
+        auth_token:
+          auth_type: password
+          auth_version: v3
+          region_name: RegionOne
+          project_domain_name: default
+          project_name: service
+          user_domain_name: default
+          username: senlin
+          password: password
+    senlin_api:
+      senlin:
+        config:
+          bind_port: 8778
+
+network:
+  api:
+    name: "senlin-api"
+    proto: "http"
+    node_port:
+      enabled: false
+      port: 30778
+
+dependencies:
+  db_init:
+    jobs:
+    - mariadb-seed
+    service:
+    - mariadb
+  db_sync:
+    jobs:
+    - senlin-db-init
+    service:
+    - mariadb
+  ks_user:
+    service:
+    - keystone-api
+  ks_service:
+    service:
+    - keystone-api
+  ks_endpoints:
+    jobs:
+    - senlin-ks-service
+    service:
+    - keystone-api
+  api:
+    jobs:
+    - senlin-db-sync
+    - senlin-ks-user
+    - senlin-ks-endpoints
+    service:
+    - keystone-api
+    - mariadb
+  engine:
+    jobs:
+    - senlin-db-sync
+    - senlin-ks-user
+    - senlin-ks-endpoints
+    service:
+    - keystone-api
+    - mariadb
+
+# typically overriden by environmental
+# values, but should include all endpoints
+# required by this chart
+endpoints:
+  identity:
+    name: keystone
+    hosts:
+      default: keystone-api
+    path: /v3
+    scheme: 'http'
+    port:
+      admin: 35357
+      api: 5000
+  clustering:
+    name: senlin
+    hosts:
+      default: senlin-api
+    path: null
+    scheme: 'http'
+    port:
+      api: 8778
+  oslo_db:
+    auth:
+      admin:
+        username: root
+        password: password
+      user:
+        username: senlin
+        password: password
+    hosts:
+      default: mariadb
+    path: /senlin
+    scheme: mysql+pymysql
+    port:
+      mysql: 3306
+  oslo_cache:
+    hosts:
+      default: memcache
+    port:
+      memcache: 11211
+  oslo_messaging:
+    auth:
+      admin:
+        username: admin
+        password: password
+      user:
+        username: rabbitmq
+        password: password
+    hosts:
+      default: rabbitmq
+    path: /
+    scheme: rabbit
+    port:
+      amqp: 5672
+
+resources:
+  enabled: false
+  senlin_api:
+    requests:
+      memory: "124Mi"
+      cpu: "100m"
+    limits:
+      memory: "1024Mi"
+      cpu: "2000m"
+  senlin_db_init:
+    requests:
+      memory: "124Mi"
+      cpu: "100m"
+    limits:
+      memory: "1024Mi"
+      cpu: "2000m"
+  senlin_db_sync:
+    requests:
+      memory: "124Mi"
+      cpu: "100m"
+    limits:
+      memory: "1024Mi"
+      cpu: "2000m"
+  senlin_ks_endpoints:
+    requests:
+      memory: "124Mi"
+      cpu: "100m"
+    limits:
+      memory: "1024Mi"
+      cpu: "2000m"
+  senlin_ks_service:
+    requests:
+      memory: "124Mi"
+      cpu: "100m"
+    limits:
+      memory: "1024Mi"
+      cpu: "2000m"
+  senlin_ks_user:
+    requests:
+      memory: "124Mi"
+      cpu: "100m"
+    limits:
+      memory: "1024Mi"
+      cpu: "2000m"
+  senlin_engine:
+    requests:
+      memory: "124Mi"
+      cpu: "100m"
+    limits:
+      memory: "1024Mi"
+      cpu: "2000m"
+
+mounts:
+  senlin_api:
+    init_container: null
+    senlin_api:
+  senlin_engine:
+    init_container: null
+    senlin_engine: