This adds a helm test for Horizon, the helm test
runs a selenium webdriver check to verify the dashboard
is up
Change-Id: I3616c05596b2bd94931c39fb774333bf65453d52
Signed-off-by: Steve Wilkerson <sw5822@att.com>
This PS adds emptydirs backing the /tmp directory in pods, which
is required in most cases for full operation when using a read only
filesystem backing the container.
Additionally some yaml indent issues are resolved.
Change-Id: I9df8f70e913b911ff755600fa2f669d9c5dcb928
Signed-off-by: Pete Birley <pete@port.direct>
Currently there is no enabling of the heat dashboard if its
installed on the horizon image.
This patch add an extra conf var that allows several dashboards
to be added and will try to find and enable them on start
If the panel dirs dont exists, it will do nothing
This patch add the extra heat_dashboard and includes the existing
neutron_taas_dashboard into the new config
Change-Id: Ibcc4da166d907f3cb842bfc45d842a650361a2d8
With this patch we allow for a more easy way of overriding some
of the values that may be used in other distros while maintainting
the default values if those values are not overriden.
The following values are introduced to be overriden:
conf:
software:
apache2:
conf_dir:
site_dir:
mods_dir:
binary:
start_flags:
a2enmod:
a2dismod:
On which:
* conf_dir: directory where to drop the config files
* site_dir: directory where to drop the enabled virtualhosts
* mods_dir: directory where to drop any mod configuration
* binary: the binary to use for launching apache
* start_flags: any flags that will be passed to the apache binary call
* a2enmod: mods to enable
* a2dismod: mods to disable
Notice that if there is no overrides given, it should not affect anything
and the templates will not be changed as the default values are set to what
they used to be as to not disrupt existing deployments.
Change-Id: If0fb9ab03aacfcd7087e753698880505571d0233
Adding any dashboards shouldbe done before compiling and compressing
as they can enable additional files that need to be compiled and
compressed, so firs we should enabled them if needed and then
compile+compress
Change-Id: Ib2fb44f5829269aa974d467ea57d9add2b9e0141
Implement container security context for the following Horizon resources:
- Horizon server deployment
Change-Id: I8202cd011f4c4f73d778c5f0ad2648440e259e5d
This adds the release-uuid annotation to the pod spec for all
replication controller templates in the openstack-helm charts
Change-Id: I0159f2741c27277fd173208e7169ff657bb33e57
This PS allows to customize (and disable) information about OS and
Apache version displayed on pages with error messages.
Change-Id: Ic4d19bcc90dadf5cf26faa5c8fb39de00a6f3212
This PS disables the server status page of Apache.
On the page provided information which can aid the
malicious user in finding vulnerabilities in the system.
Change-Id: I11104b10359808dc78a214ebb531d710ec353f60
This patchset enables and moves the securityContext: runAsUser to the pod
level, and uses a non-root user (UID != 0) wherever applicable.
Depends-On: I95264c933b51e2a8e38f63faa1e239bb3c1ebfda
Change-Id: I81f6e11fe31ab7333a3805399b2e5326ec1e06a7
Signed-off-by: Tin Lam <tin@irrational.io>
This will enable the TaaS GUI to the horizon dashbboard.
TaaS dashboard will need to be installed as part of the image,
else it will not try to add the panel.
Change-Id: I226d9d6e46f5b556a7baa88fcd06de8e571bcdff
This patch set updates the gate to by default uses network policy
for all components and enforces them in Openstack-helm.
Change-Id: I70c90b5808075797f02670f21481a4f968205325
Depends-On: I78e87ef3276e948ae4dd2eb462b4b8012251c8c8
Co-Authored-By: Mike Pham <tp6510@att.com>
Signed-off-by: Tin Lam <tin@irrational.io>
This PS adds the ability to attach a release uuid to pods and rc
objects as desired. A follow up ps will add the ability to add arbitary
annotations to the same objects.
Depends-On: Iceedba457a03387f6fc44eb763a00fd57f9d84a5
Change-Id: I324680f10263c1aefca2be9056e70d0ff22fcaf0
Signed-off-by: Pete Birley <pete@port.direct>
This PS moves openstack components in OSH to use secrets to store
potentially sensitive config information.
Depends-On: https://review.openstack.org/#/c/593732
Change-Id: I9bab586c03597effea0e48a58c69efff3f980a92
Signed-off-by: Pete Birley <pete@port.direct>
This PS adds support for TLS on over-ridden fqdn's for public
endpoints for core OpenStack Services. Currently this implementation
is limited, in that it does not provide support for dynamicly loading
CAs into the containers, or specifying them manually via configuration.
As a result only well known or CA's added manually to containers will
be recognised.
Change-Id: I8f1b699af29cbed2d83ad91bb6840dccce8c5146
Depends-On: I535f38a8d92c01280d79926a1f0acd06984aabbf
Signed-off-by: Tin Lam <tin@irrational.io>
Signed-off-by: Pete Birley <pete@port.direct>
This PS moves to use the current ga version for kubernetes deployments.
Story: 2002205
Task: 21735
Depends-On: Icb4e7aa2392da6867427a58926be2da6f424bd56
Change-Id: I062a8a29dff70427ee9bcf09f595011b3611b0b1
Signed-off-by: Pete Birley <pete@port.direct>
When removing helm-toolkit from OSH and swithcing to use the
toolkit from OSH-Infra, the image declaration function was missed.
Depends-On: I2f2012590d81ffcb159d49d8a76eedd4441744cd
Change-Id: I0f1118bb748f3fe1b6bb73acfc00e77c5cca9c7d
Signed-off-by: Pete Birley <pete@port.direct>
This PS adds support for message compilation, if the image supports
it.
Change-Id: Ie15a1a437ff516af697a5bb65c5c7831de872c30
Signed-off-by: Pete Birley <pete@port.direct>
This PS adds the local registry image managment to OSH from OSH-Infra.
With this the delta between helm-toolkits in the Repo's is removed,
allowing the toolkit from OSH-Infra to be used and the one from OSH
to be depreciated.
Change-Id: If5e218cf7df17261fe5ef249d281f9d9637e2f6a
Co-Authored-By: Pete Birley <pete@port.direct>
This PS moves all the config files to be directly values driven,
both simplifying over-ride and allowing configs to be targeted
to pods in future work.
Change-Id: I7e16585c9ef49275327d19a48f00bad192dc4923
This PS consolidates the Ingress controller service, that is used
to resolve internal requests to public endpoints correctly, to
helm-toolkit.
Change-Id: If7c7deca1b8289a32709f7dc7c936883469aadfe
This change allows enabling the WEBSSO login screen on horizon,
which allows to choose from one or more configured SSO providers.
Example configuration
local_settings:
auth:
sso:
enable: true
initial_choice: "acme_oidc"
idp_mapping:
- name: "acme_oidc"
label: "Acme Corporation - OpenID Connect"
idp: "myidp1"
protocol: "oidc"
- name: "acme_saml2"
label: "Acme Corporation - SAML2"
idp: "myidp2"
protocol: "saml2"
The initial_choice defaults to "credentials" which is the default
Keystone Credential authentication.
The values for idp: and protocol: will be used to construct the redirect
URL for keystone, which will look like:
/v3/OS-FEDERATION/identity_providers/<idp>/protocols/<protocol>/auth
Change-Id: I44e11880292176114753274f965bcd0c2cd01302
This PS moves static dependencies under a 'static' key to allow
expansion to cover dynamic dependencies.
Change-Id: I38990b93aa79fa1f70af6f2c78e5e5c61c63f32c
This PS moves all credentials for OpenStack services from 'user' to
the service name. This allows a single yaml snippet to articulate
the credentials for a deployment.
Change-Id: Ic720109f2ba854561b23767cb480bcae91f74b6b
This PS allows the ingress rules to be dynamicly driven from the
values.yaml, permitting the ingress cotnroller to ba changed and
custom rules to be applied: eg whitelisting of clients.
Change-Id: Ica6b4692ff9b6b77d1efe6bae212a1227e56ca66
This PS makes the service-specific images for Horizon have
explicit names, allowing simple over-riding of images for an
entire site.
Change-Id: I32ec3d58a4e83bd91e27abf43d4bbbdaad736d6b
External traffic policy "local" would be preffered when openstack
service is accessed from external via node port. This option has an
effect only when service node port is enabled.
Change-Id: Ic68cfc59dc39dc842d4790deffa70efe433dd7a6
This PS updates the values file layout for images to allow simple
parsing of the images in use by charts, allowing them to be queried
and modified much more simply. By moving the image tags to a 'tags'
key, we can extend the options used simply to accomodate extra
options simply (eg prefixing the tag for use with an internal
registry) or pre-pulling the images to reduce chart deploy failure.
Change-Id: I9ec1dbb00d997ab6cb021bf0b698f7aae740e95d
Implemented Kubernetes jobs to drop a database for an OpenStack service
on deletion of Helm chart. This job is configurable to be enabled or
disabled in the values.yaml file for each chart.
Change-Id: Ia1a0834cb43c7e883aaf507a7c7683fa1cf4e838
This PS make openstack_neutron_network values configurable.
For example, when using provider network we need to set router
disable.
Change-Id: I08d81a9aac5f603fc8b7f02853c89b1e09a4c878
Closes-Bug: #1716814
This PS adds namespace and fqdn support to endpoint lookup functions,
it also permits over-riding of the puplic endpoint for ingress.
Change-Id: Ib61c5c00a214d75fe85fbffe9080c2ae88bd8cb9
