Verification is added to Cinder volume type creation logic
under Values.bootstrap to make sure the volume_backend_name is
configured in Values.conf.backends.
Change-Id: I1b9b1eaac8df861d28d4121477de148dba6a2dbf
In this patchset, comfigmap of ceph.conf and secret of
cinder user keyring is created for externally managed ceph
Cinder backend.
Change-Id: Ie76bf207a7d42bd70a6be2648e060122f7daf5ad
This is to add support for external ceph cluster as second backend
for cinder.
prerequisite:
- create ceph.conf for external ceph cluster as configmap
- create cinder2 user and keyring on external ceph cluster
- create keyring of user cinder2 as a secret
now point configmap and secret created as prerequisite under
values.ceph_client.external_ceph section
also we need to add second backend under values.conf.backends section
with all the details of external ceph cluster.
Change-Id: I8df9f1da7208304f479dbb70b19af97fb01cd38f
The current copyright refers to a non-existent group
"openstack helm authors" with often out-of-date references that
are confusing when adding a new file to the repo.
This change removes all references to this copyright by the
non-existent group and any blank lines underneath.
Change-Id: Ia035037e000f1bf95202fc07b8cd1ad0fc019094
In this patchset, the iSCSI protocol support is added
to enable Cinder to use iSCSI based storage backends.
Bootable volumes are not supported, only VM attached
volumes are supported for this initial patchset.
Change-Id: I1b35290b62d2cebae4bd8be62126a53f230ac6c0
- Change all tests to support Nautilus,Mimic and Luminous releases
- Update ceph-config-helper image
Change-Id: I557b1efa12529d0ee51d4c5b9d4beb4abf1b0574
This commit changes the cinder template bootstrap script
to use the openstack client instead of the cinder client
to list volume types.
Change-Id: I5a4b22ab4475d503b3e8fa46cd3c56a0b40863e0
Signed-off-by: Teresa Ho <teresa.ho@windriver.com>
During the Queens cycle, Cinder introduced the ability to specify the
backup driver via class name and deprecated backup driver initialization
using the module name. (Id6bee9e7d0da8ead224a04f86fe79ddfb5b286cf)
Legacy support for initialization by module name was dropped in Stein.
(I3ada2dee1857074746b1893b82dd5f6641c6e579)
This change will support both methods of initialization and leave the
driver defaults enabled for module based initialization (valid through
Rocky images).
This change has been tested using the OSH default Cinder (Ocata) images
and StarlingX images based on master (Train).
Change-Id: Iec7bc6f4dd089aaa08ca652bebd9a10ef49da556
Signed-off-by: Robert Church <robert.church@windriver.com>
Cinder raw cache feature requires internal tenant id be set in
/etc/cinder/cinder.conf, something like:
cinder_internal_tenant_project_id = b7455b8974bb4064ad247c8f375eae6c
cinder_internal_tenant_user_id = f46924c112a14c80ab0a24a613d95eef
This patch get or create if not exist intenal user id and project id, and then
set in cinder.conf
reference: Cinder cache feature:
https://docs.openstack.org/cinder/latest/admin/blockstorage-image-volume-cache.html
Story: 2004869
Task: 29121
Change-Id: I07954d2efa905a56ca8482d0ec147534c97d01ea
Signed-off-by: Liang Fang <liang.a.fang@intel.com>
- Change all tests to support Mimic and Luminous releases
- Update ceph-config-helper dockerfile to use Mimic Ceph binaries
Change-Id: I06a545c1964eaa5b983c58db48b6ad4ccaaa3b8b
The update makes sure the Openstack service's cephx
user capabilities match best practices in terms of
security permissions after a site or software update.
Change-Id: I70e7f620accb186da2013ba95472777c25739cc1
In a jewel version, egrep -c "12.2|luminous" returns "0",
but execution will be error.
So, add pipe and echo command to make a success.
Change-Id: I94f45855f6510e747884d8b6a629a62c3d96adbd
This PS allows the cinder-backup to use a separate ceph backend, you
can add a ceph ip and admin keyring to .Values.backup_ceph so that
cinder-backup can use the new ceph.
blueprint add-ceph-configuration-for-cinder-backup
Change-Id: Ib2c4ca3945a15107d77e36635bda52297de9f164
This PS exposes the Ceph RBD pool params to the cinder chart, allowing
them to be tuned.
Change-Id: I615e999928948193b24cc4978efb31bd1b36f8f7
Closes-Bug: #1754535
Previously, the ceph version was checked with "ceph -v".
However, this way is only check for the ceph client version.
So I change the way to check the ceph osd version.
Change-Id: I11f44186f671594e6e9e848f3fddb1d23b994b36
Like a glance, gnocchi, ceph-admin-keyring script should be needed when
execute storage_init.sh in cinder.
Change-Id: I5ab1b474de7cc0a9f80642502d74d1d1f156dea5
Closes-bug: 1744207
This PS fixes the jobs falling into a crash loop state
when upgrading charts.
'kubectl create' command cannot overwrite if a secret already
exists. But 'kubectl apply' command can do it.
Change-Id: Idd6eea06892a30e36e51a9b1130fd7cd84ff65cf
The logic for check ceph version in some charts has a code that doesn't
work. This patch check ceph version properly.
Change-Id: Ie97a3ec5ac5078f556f59a09db820ee574c60f50
The storage_init script in some charts has a code that doesn't work
with older than ceph luminous. This PS allows execution in both ceph
luminous and older versions like kraken jewel.
Change-Id: I5d21fb027328e7d3490625894bd14905988ba320
Closes-bug: 1742021
This PS removes the licence header from rendered output from tiller,
significantly reducing the configmap size of charts deployed to the
cluster.
Change-Id: I5d1b246f2068f3b83bf59ba79fe8b88bbc9a6161
This PS refactors the ceph chart and secret generation process.
The updated chart replaces the existing "bootstrap" chart.
Additionally, Ceph manifests and deployment guides were modified
accordingly.
Change-Id: I6f5bb88fc0f40cfee8865d9dab83859d765e7537
Co-Authored-By: Larry Rensing <lr699s@att.com>
This PS add Barbican support, and moves all potentially container
specific logic into the service start script from the api manifests.
Also fixes a permissions issue with the nova-api, which incorrectly
had the NET_ADMIN capability.
Change-Id: I18fc1ea5d7aa70ea7dabb829361a3da57e905100
This commit adds the bootstrap framework to Cinder.
- If volume type already exists do not recreate
- Create volume types as defined in Values.conf.backends
- Create additional volume types defined in Values.bootstrap,
available backends must be defined in Values.conf.backends
Change-Id: I577df7bf50d66c8ef70e74466a0bf1c4c221ca68
Partially implements: https://blueprints.launchpad.net/openstack-helm/+spec/service-bootstrap
This PS moves the container start commands to scripts. This brings
the service into alignment with other ones in OpenStack-Helm, and enables
easier debugging and modifcation of the launch commands for services.
Change-Id: Iff08c9fdaf34efeee3dea2c4b859b0a4e77bc9a9
