# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Default values for horizon.
# This is a YAML-formatted file.
# Declare name/value pairs to be passed into your templates.
# name: value
---
images:
tags:
db_init: docker.io/openstackhelm/heat:stein-ubuntu_bionic
horizon_db_sync: docker.io/openstackhelm/horizon:stein-ubuntu_bionic
db_drop: docker.io/openstackhelm/heat:stein-ubuntu_bionic
horizon: docker.io/openstackhelm/horizon:stein-ubuntu_bionic
test: docker.io/openstackhelm/osh-selenium:latest-ubuntu_bionic
dep_check: quay.io/airshipit/kubernetes-entrypoint:v1.0.0
image_repo_sync: docker.io/docker:17.07.0
pull_policy: "IfNotPresent"
local_registry:
active: false
exclude:
- dep_check
- image_repo_sync
release_group: null
labels:
dashboard:
node_selector_key: openstack-control-plane
node_selector_value: enabled
job:
node_selector_key: openstack-control-plane
node_selector_value: enabled
test:
node_selector_key: openstack-control-plane
node_selector_value: enabled
network:
dashboard:
ingress:
public: true
classes:
namespace: "nginx"
cluster: "nginx-cluster"
annotations:
nginx.ingress.kubernetes.io/rewrite-target: /
external_policy_local: false
node_port:
enabled: false
port: 31000
conf:
software:
apache2:
binary: apache2
start_parameters: -DFOREGROUND
site_dir: /etc/apache2/sites-available
conf_dir: /etc/apache2/conf-available
mods_dir: /etc/apache2/mods-available
a2enmod:
- headers
- rewrite
a2dismod:
- status
horizon:
branding:
logo:
logo_splash:
favicon:
apache: |
<IfVersion < 2.4>
Listen 0.0.0.0:{{ tuple "dashboard" "internal" "web" . | include "helm-toolkit.endpoints.endpoint_port_lookup" }}
</IfVersion>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%{X-Forwarded-For}i %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" proxy
SetEnvIf X-Forwarded-For "^.*\..*\..*\..*" forwarded
CustomLog /dev/stdout combined env=!forwarded
CustomLog /dev/stdout proxy env=forwarded
<VirtualHost *:{{ tuple "dashboard" "internal" "web" . | include "helm-toolkit.endpoints.endpoint_port_lookup" }}>
WSGIScriptReloading On
WSGIDaemonProcess horizon-http processes=5 threads=1 user=horizon group=horizon display-name=%{GROUP} python-path=/var/lib/kolla/venv/lib/python2.7/site-packages
WSGIProcessGroup horizon-http
WSGIScriptAlias / /var/www/cgi-bin/horizon/django.wsgi
WSGIPassAuthorization On
RewriteEngine on
RewriteCond %{REQUEST_METHOD} !^(POST|PUT|GET|DELETE|PATCH)
RewriteRule .* - [F]
<Location "/">
Require all granted
</Location>
Alias /static /var/www/html/horizon
<Location "/static">
SetHandler static
</Location>
<IfVersion >= 2.4>
ErrorLogFormat "%{cu}t %M"
</IfVersion>
ErrorLog /dev/stdout
TransferLog /dev/stdout
SetEnvIf X-Forwarded-For "^.*\..*\..*\..*" forwarded
CustomLog /dev/stdout combined env=!forwarded
CustomLog /dev/stdout proxy env=forwarded
</Virtualhost>
security: |
#
# Disable access to the entire file system except for the directories that
# are explicitly allowed later.
#
# This currently breaks the configurations that come with some web application
# Debian packages.
#
#<Directory />
# AllowOverride None
# Require all denied
#</Directory>
# Changing the following options will not really affect the security of the
# server, but might make attacks slightly more difficult in some cases.
#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minimal | Minor | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Prod
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature Off
#
# Allow TRACE method
#
# Set to "extended" to also reflect the request body (only for testing and
# diagnostic purposes).
#
# Set to one of: On | Off | extended
TraceEnable Off
#
# Forbid access to version control directories
#
# If you use version control systems in your document root, you should
# probably deny access to their directories. For example, for subversion:
#
#<DirectoryMatch "/\.svn">
# Require all denied
#</DirectoryMatch>
#Security-Settings
# Setting this header will prevent MSIE from interpreting files as something
# else than declared by the content type in the HTTP headers.
# Requires mod_headers to be enabled.
#
Header set X-Content-Type-Options: "nosniff"
Header set X-Permitted-Cross-Domain-Policies: "none"
# Setting this header will prevent other sites from embedding pages from this
# site as frames. This defends against clickjacking attacks.
# Requires mod_headers to be enabled.
#
local_settings_d: {}
## For example, _50_monasca_ui_settings.py
# _50_monasca_ui_settings: |
# from django.conf import settings
# # Grafana button titles/file names (global across all projects):
# GRAFANA_LINKS = []
# DASHBOARDS = getattr(settings, 'GRAFANA_LINKS', GRAFANA_LINKS)
local_settings:
config:
# Use "True" and "False" as Titlecase strings with quotes, boolean
# values will not work
horizon_secret_key: 9aee62c0-5253-4a86-b189-e0fb71fa503c
debug: "False"
use_ssl: "False"
endpoint_type: "internalURL"
keystone_multidomain_support: "True"
keystone_default_domain: Default
disable_password_reveal: "True"
show_openrc_file: "True"
csrf_cookie_secure: "False"
csrf_cookie_httponly: "False"
enforce_password_check: "True"
# Set enable_pwd_validator to true to enforce password validator settings.
enable_pwd_validator: false
pwd_validator_regex: '(?=.*[a-zA-Z])(?=.*\d).{8,}|(?=.*\d)(?=.*\W).{8,}|(?=.*\W)(?=.*[a-zA-Z]).{8,}'
pwd_validator_help_text: '_("Your password must be at least eight (8) characters in length and must include characters from at least two (2) of these groupings: alpha, numeric, and special characters.")'
session_cookie_secure: "False"
session_cookie_httponly: "False"
secure_proxy_ssl_header: false
password_autocomplete: "False"
disallow_iframe_embed: "False"
allowed_hosts:
- '*'
horizon_images_upload_mode: 'legacy'
openstack_cinder_features:
enable_backup: "True"
openstack_neutron_network:
enable_router: "True"
enable_quotas: "True"
enable_ipv6: "True"
enable_distributed_router: "False"
enable_ha_router: "False"
enable_lb: "True"
enable_firewall: "True"
enable_vpn: "True"
enable_fip_topology_check: "True"
openstack_enable_password_retrieve: "False"
auth:
sso:
enabled: False
initial_choice: "credentials"
idp_mapping:
- name: "acme_oidc"
label: "Acme Corporation - OpenID Connect"
idp: "myidp1"
protocol: "oidc"
- name: "acme_saml2"
label: "Acme Corporation - SAML2"
idp: "myidp2"
protocol: "saml2"
log_level: "DEBUG"
# Pass any settings to the end of local_settings.py
raw: {}
openstack_api_versions:
container_infra: "1.19"
template: |
import os
from django.utils.translation import ugettext_lazy as _
from openstack_dashboard import exceptions
DEBUG = {{ .Values.conf.horizon.local_settings.config.debug }}
TEMPLATE_DEBUG = DEBUG
COMPRESS_OFFLINE = True
COMPRESS_CSS_HASHING_METHOD = "hash"
# WEBROOT is the location relative to Webserver root
# should end with a slash.
WEBROOT = '/'
# LOGIN_URL = WEBROOT + 'auth/login/'
# LOGOUT_URL = WEBROOT + 'auth/logout/'
#
# LOGIN_REDIRECT_URL can be used as an alternative for
# HORIZON_CONFIG.user_home, if user_home is not set.
# Do not set it to '/home/', as this will cause circular redirect loop
# LOGIN_REDIRECT_URL = WEBROOT
# Required for Django 1.5.
# If horizon is running in production (DEBUG is False), set this
# with the list of host/domain names that the application can serve.
# For more information see:
# https://docs.djangoproject.com/en/dev/ref/settings/#allowed-hosts
ALLOWED_HOSTS = [{{ include "helm-toolkit.utils.joinListWithCommaAndSingleQuotes" .Values.conf.horizon.local_settings.config.allowed_hosts }},'%s' % (os.environ.get("MY_POD_IP"))]
# Set SSL proxy settings:
# For Django 1.4+ pass this header from the proxy after terminating the SSL,
# and don't forget to strip it from the client's request.
# For more information see:
# https://docs.djangoproject.com/en/1.4/ref/settings/#secure-proxy-ssl-header
#SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_PROTOCOL', 'https')
# https://docs.djangoproject.com/en/1.5/ref/settings/#secure-proxy-ssl-header
{{- if .Values.conf.horizon.local_settings.config.secure_proxy_ssl_header }}
SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_PROTO', 'https')
{{- end }}
# If Horizon is being served through SSL, then uncomment the following two
# settings to better secure the cookies from security exploits
USE_SSL = {{ .Values.conf.horizon.local_settings.config.use_ssl }}
CSRF_COOKIE_SECURE = {{ .Values.conf.horizon.local_settings.config.csrf_cookie_secure }}
CSRF_COOKIE_HTTPONLY = {{ .Values.conf.horizon.local_settings.config.csrf_cookie_httponly }}
SESSION_COOKIE_SECURE = {{ .Values.conf.horizon.local_settings.config.session_cookie_secure }}
SESSION_COOKIE_HTTPONLY = {{ .Values.conf.horizon.local_settings.config.session_cookie_httponly }}
# Overrides for OpenStack API versions. Use this setting to force the
# OpenStack dashboard to use a specific API version for a given service API.
# Versions specified here should be integers or floats, not strings.
# NOTE: The version should be formatted as it appears in the URL for the
# service API. For example, The identity service APIs have inconsistent
# use of the decimal point, so valid options would be 2.0 or 3.
#OPENSTACK_API_VERSIONS = {
# "data-processing": 1.1,
# "identity": 3,
# "volume": 2,
#}
OPENSTACK_API_VERSIONS = {
"identity": 3,
"container-infra": {{ .Values.conf.horizon.local_settings.config.openstack_api_versions.container_infra }}
}
# Set this to True if running on multi-domain model. When this is enabled, it
# will require user to enter the Domain name in addition to username for login.
OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = {{ .Values.conf.horizon.local_settings.config.keystone_multidomain_support }}
# Overrides the default domain used when running on single-domain model
# with Keystone V3. All entities will be created in the default domain.
OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = '{{ .Values.conf.horizon.local_settings.config.keystone_default_domain }}'
# Set Console type:
# valid options are "AUTO"(default), "VNC", "SPICE", "RDP", "SERIAL" or None
# Set to None explicitly if you want to deactivate the console.
#CONSOLE_TYPE = "AUTO"
# Default OpenStack Dashboard configuration.
HORIZON_CONFIG = {
'user_home': 'openstack_dashboard.views.get_user_home',
'ajax_queue_limit': 10,
'auto_fade_alerts': {
'delay': 3000,
'fade_duration': 1500,
'types': ['alert-success', 'alert-info']
},
'help_url': "http://docs.openstack.org",
'exceptions': {'recoverable': exceptions.RECOVERABLE,
'not_found': exceptions.NOT_FOUND,
'unauthorized': exceptions.UNAUTHORIZED},
'modal_backdrop': 'static',
'angular_modules': [],
'js_files': [],
'js_spec_files': [],
}
{{- if .Values.conf.horizon.local_settings.config.enable_pwd_validator }}
# Specify a regular expression to validate user passwords.
HORIZON_CONFIG["password_validator"] = {
"regex": '{{ .Values.conf.horizon.local_settings.config.pwd_validator_regex }}',
"help_text": {{ .Values.conf.horizon.local_settings.config.pwd_validator_help_text }},
}
{{- end }}
# Disable simplified floating IP address management for deployments with
# multiple floating IP pools or complex network requirements.
#HORIZON_CONFIG["simple_ip_management"] = False
# Turn off browser autocompletion for forms including the login form and
# the database creation workflow if so desired.
HORIZON_CONFIG["password_autocomplete"] = '{{ .Values.conf.horizon.local_settings.config.password_autocomplete }}'
# Setting this to True will disable the reveal button for password fields,
# including on the login form.
HORIZON_CONFIG["disable_password_reveal"] = {{ .Values.conf.horizon.local_settings.config.disable_password_reveal }}
LOCAL_PATH = '/tmp'
# Set custom secret key:
# You can either set it to a specific value or you can let horizon generate a
# default secret key that is unique on this machine, e.i. regardless of the
# amount of Python WSGI workers (if used behind Apache+mod_wsgi): However,
# there may be situations where you would want to set this explicitly, e.g.
# when multiple dashboard instances are distributed on different machines
# (usually behind a load-balancer). Either you have to make sure that a session
# gets all requests routed to the same dashboard instance or you set the same
# SECRET_KEY for all of them.
SECRET_KEY='{{ .Values.conf.horizon.local_settings.config.horizon_secret_key }}'
CACHES = {
'default': {
'BACKEND': 'django.core.cache.backends.memcached.MemcachedCache',
'LOCATION': '{{ tuple "oslo_cache" "internal" "memcache" . | include "helm-toolkit.endpoints.host_and_port_endpoint_uri_lookup" }}',
}
}
DATABASES = {
'default': {
# Database configuration here
'ENGINE': 'django.db.backends.mysql',
'NAME': '{{ .Values.endpoints.oslo_db.path | base }}',
'USER': '{{ .Values.endpoints.oslo_db.auth.horizon.username }}',
'PASSWORD': '{{ .Values.endpoints.oslo_db.auth.horizon.password }}',
'HOST': '{{ tuple "oslo_db" "internal" . | include "helm-toolkit.endpoints.hostname_fqdn_endpoint_lookup" }}',
'default-character-set': 'utf8',
{{- if .Values.manifests.certificates }}
'OPTIONS':{
'ssl': {
'ca': '/etc/mysql/certs/ca.crt',
'cert': '/etc/mysql/certs/tls.crt',
'key': '/etc/mysql/certs/tls.key'
}
},
{{- end }}
'PORT': '{{ tuple "oslo_db" "internal" "mysql" . | include "helm-toolkit.endpoints.endpoint_port_lookup" }}'
}
}
SESSION_ENGINE = 'django.contrib.sessions.backends.cached_db'
# Send email to the console by default
EMAIL_BACKEND = 'django.core.mail.backends.console.EmailBackend'
# Or send them to /dev/null
#EMAIL_BACKEND = 'django.core.mail.backends.dummy.EmailBackend'
# Configure these for your outgoing email host
#EMAIL_HOST = 'smtp.my-company.com'
#EMAIL_PORT = 25\\
#EMAIL_HOST_USER = 'djangomail'
#EMAIL_HOST_PASSWORD = 'top-secret!'
# For multiple regions uncomment this configuration, and add (endpoint, title).
#AVAILABLE_REGIONS = [
# ('http://cluster1.example.com:5000/v2.0', 'cluster1'),
# ('http://cluster2.example.com:5000/v2.0', 'cluster2'),
#]
OPENSTACK_KEYSTONE_URL = "{{ tuple "identity" "internal" "api" . | include "helm-toolkit.endpoints.keystone_endpoint_uri_lookup" }}"
OPENSTACK_KEYSTONE_DEFAULT_ROLE = "member"
# This setting specifies the name of the header with remote IP address. If not present,
# then REMOTE_ADDR header is used. The commom value for this setting is HTTP_X_REAL_IP
# or HTTP_X_FORWARDED_FORx
SECURE_PROXY_ADDR_HEADER = 'HTTP_X_FORWARDED_FOR'
{{- if .Values.conf.horizon.local_settings.config.auth.sso.enabled }}
# Enables keystone web single-sign-on if set to True.
WEBSSO_ENABLED = True
# Determines which authentication choice to show as default.
WEBSSO_INITIAL_CHOICE = "{{ .Values.conf.horizon.local_settings.config.auth.sso.initial_choice }}"
# The list of authentication mechanisms
# which include keystone federation protocols.
# Current supported protocol IDs are 'saml2' and 'oidc'
# which represent SAML 2.0, OpenID Connect respectively.
# Do not remove the mandatory credentials mechanism.
WEBSSO_CHOICES = (
("credentials", _("Keystone Credentials")),
{{- range $i, $sso := .Values.conf.horizon.local_settings.config.auth.idp_mapping }}
({{ $sso.name | quote }}, {{ $sso.label | quote }}),
{{- end }}
)
WEBSSO_IDP_MAPPING = {
{{- range $i, $sso := .Values.conf.horizon.local_settings.config.auth.idp_mapping }}
{{ $sso.name | quote}}: ({{ $sso.idp | quote }}, {{ $sso.protocol | quote }}),
{{- end }}
}
{{- end }}
# Disable SSL certificate checks (useful for self-signed certificates):
#OPENSTACK_SSL_NO_VERIFY = True
{{- if .Values.manifests.certificates }}
# The CA certificate to use to verify SSL connections
OPENSTACK_SSL_CACERT = '/etc/openstack-dashboard/certs/ca.crt'
{{- end }}
# The OPENSTACK_KEYSTONE_BACKEND settings can be used to identify the
# capabilities of the auth backend for Keystone.
# If Keystone has been configured to use LDAP as the auth backend then set
# can_edit_user to False and name to 'ldap'.
#
# TODO(tres): Remove these once Keystone has an API to identify auth backend.
OPENSTACK_KEYSTONE_BACKEND = {
'name': 'native',
'can_edit_user': True,
'can_edit_group': True,
'can_edit_project': True,
'can_edit_domain': True,
'can_edit_role': True,
}
# Setting this to True, will add a new "Retrieve Password" action on instance,
# allowing Admin session password retrieval/decryption.
OPENSTACK_ENABLE_PASSWORD_RETRIEVE = {{ .Values.conf.horizon.local_settings.config.openstack_enable_password_retrieve }}
# Controls whether the keystone openrc file is accessible from the user menu and the api access panel.
SHOW_OPENRC_FILE = {{ .Values.conf.horizon.local_settings.config.show_openrc_file }}
# The Launch Instance user experience has been significantly enhanced.
# You can choose whether to enable the new launch instance experience,
# the legacy experience, or both. The legacy experience will be removed
# in a future release, but is available as a temporary backup setting to ensure
# compatibility with existing deployments. Further development will not be
# done on the legacy experience. Please report any problems with the new
# experience via the StoryBoard tracking system.
#
# Toggle LAUNCH_INSTANCE_LEGACY_ENABLED and LAUNCH_INSTANCE_NG_ENABLED to
# determine the experience to enable. Set them both to true to enable
# both.
#LAUNCH_INSTANCE_LEGACY_ENABLED = True
#LAUNCH_INSTANCE_NG_ENABLED = False
# The Xen Hypervisor has the ability to set the mount point for volumes
# attached to instances (other Hypervisors currently do not). Setting
# can_set_mount_point to True will add the option to set the mount point
# from the UI.
OPENSTACK_HYPERVISOR_FEATURES = {
'can_set_mount_point': False,
'can_set_password': False,
}
# The OPENSTACK_CINDER_FEATURES settings can be used to enable optional
# services provided by cinder that is not exposed by its extension API.
OPENSTACK_CINDER_FEATURES = {
'enable_backup': {{ .Values.conf.horizon.local_settings.config.openstack_cinder_features.enable_backup }},
}
# The OPENSTACK_NEUTRON_NETWORK settings can be used to enable optional
# services provided by neutron. Options currently available are load
# balancer service, security groups, quotas, VPN service.
OPENSTACK_NEUTRON_NETWORK = {
'enable_router': {{ .Values.conf.horizon.local_settings.config.openstack_neutron_network.enable_router }},
'enable_quotas': {{ .Values.conf.horizon.local_settings.config.openstack_neutron_network.enable_quotas }},
'enable_ipv6': {{ .Values.conf.horizon.local_settings.config.openstack_neutron_network.enable_ipv6 }},
'enable_distributed_router': {{ .Values.conf.horizon.local_settings.config.openstack_neutron_network.enable_distributed_router }},
'enable_ha_router': {{ .Values.conf.horizon.local_settings.config.openstack_neutron_network.enable_ha_router }},
'enable_lb': {{ .Values.conf.horizon.local_settings.config.openstack_neutron_network.enable_lb }},
'enable_firewall': {{ .Values.conf.horizon.local_settings.config.openstack_neutron_network.enable_firewall }},
'enable_vpn': {{ .Values.conf.horizon.local_settings.config.openstack_neutron_network.enable_vpn }},
'enable_fip_topology_check': {{ .Values.conf.horizon.local_settings.config.openstack_neutron_network.enable_fip_topology_check }},
# The profile_support option is used to detect if an external router can be
# configured via the dashboard. When using specific plugins the
# profile_support can be turned on if needed.
'profile_support': None,
#'profile_support': 'cisco',
# Set which provider network types are supported. Only the network types
# in this list will be available to choose from when creating a network.
# Network types include local, flat, vlan, gre, and vxlan.
'supported_provider_types': ['*'],
# Set which VNIC types are supported for port binding. Only the VNIC
# types in this list will be available to choose from when creating a
# port.
# VNIC types include 'normal', 'macvtap' and 'direct'.
'supported_vnic_types': ['*']
}
# The OPENSTACK_IMAGE_BACKEND settings can be used to customize features
# in the OpenStack Dashboard related to the Image service, such as the list
# of supported image formats.
#OPENSTACK_IMAGE_BACKEND = {
# 'image_formats': [
# ('', _('Select format')),
# ('aki', _('AKI - Amazon Kernel Image')),
# ('ami', _('AMI - Amazon Machine Image')),
# ('ari', _('ARI - Amazon Ramdisk Image')),
# ('docker', _('Docker')),
# ('iso', _('ISO - Optical Disk Image')),
# ('ova', _('OVA - Open Virtual Appliance')),
# ('qcow2', _('QCOW2 - QEMU Emulator')),
# ('raw', _('Raw')),
# ('vdi', _('VDI - Virtual Disk Image')),
# ('vhd', ('VHD - Virtual Hard Disk')),
# ('vmdk', _('VMDK - Virtual Machine Disk')),
# ]
#}
# The IMAGE_CUSTOM_PROPERTY_TITLES settings is used to customize the titles for
# image custom property attributes that appear on image detail pages.
IMAGE_CUSTOM_PROPERTY_TITLES = {
"architecture": _("Architecture"),
"kernel_id": _("Kernel ID"),
"ramdisk_id": _("Ramdisk ID"),
"image_state": _("Euca2ools state"),
"project_id": _("Project ID"),
"image_type": _("Image Type"),
}
# The IMAGE_RESERVED_CUSTOM_PROPERTIES setting is used to specify which image
# custom properties should not be displayed in the Image Custom Properties
# table.
IMAGE_RESERVED_CUSTOM_PROPERTIES = []
# Set to 'legacy' or 'direct' to allow users to upload images to glance via
# Horizon server. When enabled, a file form field will appear on the create
# image form. If set to 'off', there will be no file form field on the create
# image form. See documentation for deployment considerations.
HORIZON_IMAGES_UPLOAD_MODE = '{{ .Values.conf.horizon.local_settings.config.horizon_images_upload_mode }}'
# OPENSTACK_ENDPOINT_TYPE specifies the endpoint type to use for the endpoints
# in the Keystone service catalog. Use this setting when Horizon is running
# external to the OpenStack environment. The default is 'publicURL'.
OPENSTACK_ENDPOINT_TYPE = "{{ .Values.conf.horizon.local_settings.config.endpoint_type }}"
# SECONDARY_ENDPOINT_TYPE specifies the fallback endpoint type to use in the
# case that OPENSTACK_ENDPOINT_TYPE is not present in the endpoints
# in the Keystone service catalog. Use this setting when Horizon is running
# external to the OpenStack environment. The default is None. This
# value should differ from OPENSTACK_ENDPOINT_TYPE if used.
SECONDARY_ENDPOINT_TYPE = "publicURL"
# The number of objects (Swift containers/objects or images) to display
# on a single page before providing a paging element (a "more" link)
# to paginate results.
API_RESULT_LIMIT = 1000
API_RESULT_PAGE_SIZE = 20
# The size of chunk in bytes for downloading objects from Swift
SWIFT_FILE_TRANSFER_CHUNK_SIZE = 512 * 1024
# Specify a maximum number of items to display in a dropdown.
DROPDOWN_MAX_ITEMS = 30
# The timezone of the server. This should correspond with the timezone
# of your entire OpenStack installation, and hopefully be in UTC.
TIME_ZONE = "UTC"
# When launching an instance, the menu of available flavors is
# sorted by RAM usage, ascending. If you would like a different sort order,
# you can provide another flavor attribute as sorting key. Alternatively, you
# can provide a custom callback method to use for sorting. You can also provide
# a flag for reverse sort. For more info, see
# http://docs.python.org/2/library/functions.html#sorted
#CREATE_INSTANCE_FLAVOR_SORT = {
# 'key': 'name',
# # or
# 'key': my_awesome_callback_method,
# 'reverse': False,
#}
# Set this to True to display an 'Admin Password' field on the Change Password
# form to verify that it is indeed the admin logged-in who wants to change
# the password.
ENFORCE_PASSWORD_CHECK = {{ .Values.conf.horizon.local_settings.config.enforce_password_check }}
# Modules that provide /auth routes that can be used to handle different types
# of user authentication. Add auth plugins that require extra route handling to
# this list.
#AUTHENTICATION_URLS = [
# 'openstack_auth.urls',
#]
# The Horizon Policy Enforcement engine uses these values to load per service
# policy rule files. The content of these files should match the files the
# OpenStack services are using to determine role based access control in the
# target installation.
# Path to directory containing policy.yaml files
POLICY_FILES_PATH = '/etc/openstack-dashboard'
# Map of local copy of service policy files
#POLICY_FILES = {
# 'identity': 'keystone_policy.yaml',
# 'compute': 'nova_policy.yaml',
# 'volume': 'cinder_policy.yaml',
# 'image': 'glance_policy.yaml',
# 'orchestration': 'heat_policy.yaml',
# 'network': 'neutron_policy.yaml',
# 'telemetry': 'ceilometer_policy.yaml',
#}
# Trove user and database extension support. By default support for
# creating users and databases on database instances is turned on.
# To disable these extensions set the permission here to something
# unusable such as ["!"].
# TROVE_ADD_USER_PERMS = []
# TROVE_ADD_DATABASE_PERMS = []
# Change this patch to the appropriate static directory containing
# two files: _variables.scss and _styles.scss
#CUSTOM_THEME_PATH = 'static/themes/default'
LOGGING = {
'version': 1,
# When set to True this will disable all logging except
# for loggers specified in this configuration dictionary. Note that
# if nothing is specified here and disable_existing_loggers is True,
# django.db.backends will still log unless it is disabled explicitly.
'disable_existing_loggers': False,
'handlers': {
'null': {
'level': 'DEBUG',
'class': 'logging.NullHandler',
},
'console': {
# Set the level to "DEBUG" for verbose output logging.
'level': 'INFO',
'class': 'logging.StreamHandler',
},
},
'loggers': {
# Logging from django.db.backends is VERY verbose, send to null
# by default.
'django.db.backends': {
'handlers': ['null'],
'propagate': False,
},
'requests': {
'handlers': ['null'],
'propagate': False,
},
'horizon': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'openstack_dashboard': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'novaclient': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'cinderclient': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'glanceclient': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'glanceclient': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'neutronclient': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'heatclient': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'ceilometerclient': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'troveclient': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'swiftclient': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'openstack_auth': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'nose.plugins.manager': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'django': {
'handlers': ['console'],
'level': '{{ .Values.conf.horizon.local_settings.config.log_level }}',
'propagate': False,
},
'iso8601': {
'handlers': ['null'],
'propagate': False,
},
'scss': {
'handlers': ['null'],
'propagate': False,
},
}
}
# 'direction' should not be specified for all_tcp/udp/icmp.
# It is specified in the form.
SECURITY_GROUP_RULES = {
'all_tcp': {
'name': _('All TCP'),
'ip_protocol': 'tcp',
'from_port': '1',
'to_port': '65535',
},
'all_udp': {
'name': _('All UDP'),
'ip_protocol': 'udp',
'from_port': '1',
'to_port': '65535',
},
'all_icmp': {
'name': _('All ICMP'),
'ip_protocol': 'icmp',
'from_port': '-1',
'to_port': '-1',
},
'ssh': {
'name': 'SSH',
'ip_protocol': 'tcp',
'from_port': '22',
'to_port': '22',
},
'smtp': {
'name': 'SMTP',
'ip_protocol': 'tcp',
'from_port': '25',
'to_port': '25',
},
'dns': {
'name': 'DNS',
'ip_protocol': 'tcp',
'from_port': '53',
'to_port': '53',
},
'http': {
'name': 'HTTP',
'ip_protocol': 'tcp',
'from_port': '80',
'to_port': '80',
},
'pop3': {
'name': 'POP3',
'ip_protocol': 'tcp',
'from_port': '110',
'to_port': '110',
},
'imap': {
'name': 'IMAP',
'ip_protocol': 'tcp',
'from_port': '143',
'to_port': '143',
},
'ldap': {
'name': 'LDAP',
'ip_protocol': 'tcp',
'from_port': '389',
'to_port': '389',
},
'https': {
'name': 'HTTPS',
'ip_protocol': 'tcp',
'from_port': '443',
'to_port': '443',
},
'smtps': {
'name': 'SMTPS',
'ip_protocol': 'tcp',
'from_port': '465',
'to_port': '465',
},
'imaps': {
'name': 'IMAPS',
'ip_protocol': 'tcp',
'from_port': '993',
'to_port': '993',
},
'pop3s': {
'name': 'POP3S',
'ip_protocol': 'tcp',
'from_port': '995',
'to_port': '995',
},
'ms_sql': {
'name': 'MS SQL',
'ip_protocol': 'tcp',
'from_port': '1433',
'to_port': '1433',
},
'mysql': {
'name': 'MYSQL',
'ip_protocol': 'tcp',
'from_port': '3306',
'to_port': '3306',
},
'rdp': {
'name': 'RDP',
'ip_protocol': 'tcp',
'from_port': '3389',
'to_port': '3389',
},
}
# Deprecation Notice:
#
# The setting FLAVOR_EXTRA_KEYS has been deprecated.
# Please load extra spec metadata into the Glance Metadata Definition Catalog.
#
# The sample quota definitions can be found in:
# <glance_source>/etc/metadefs/compute-quota.json
#
# The metadata definition catalog supports CLI and API:
# $glance --os-image-api-version 2 help md-namespace-import
# $glance-manage db_load_metadefs <directory_with_definition_files>
#
# See Metadata Definitions on: https://docs.openstack.org/glance/latest/
# Indicate to the Sahara data processing service whether or not
# automatic floating IP allocation is in effect. If it is not
# in effect, the user will be prompted to choose a floating IP
# pool for use in their cluster. False by default. You would want
# to set this to True if you were running Nova Networking with
# auto_assign_floating_ip = True.
#SAHARA_AUTO_IP_ALLOCATION_ENABLED = False
# The hash algorithm to use for authentication tokens. This must
# match the hash algorithm that the identity server and the
# auth_token middleware are using. Allowed values are the
# algorithms supported by Python's hashlib library.
#OPENSTACK_TOKEN_HASH_ALGORITHM = 'md5'
# AngularJS requires some settings to be made available to
# the client side. Some settings are required by in-tree / built-in horizon
# features. These settings must be added to REST_API_REQUIRED_SETTINGS in the
# form of ['SETTING_1','SETTING_2'], etc.
#
# You may remove settings from this list for security purposes, but do so at
# the risk of breaking a built-in horizon feature. These settings are required
# for horizon to function properly. Only remove them if you know what you
# are doing. These settings may in the future be moved to be defined within
# the enabled panel configuration.
# You should not add settings to this list for out of tree extensions.
# See: https://wiki.openstack.org/wiki/Horizon/RESTAPI
REST_API_REQUIRED_SETTINGS = ['OPENSTACK_HYPERVISOR_FEATURES',
'LAUNCH_INSTANCE_DEFAULTS',
'OPENSTACK_IMAGE_FORMATS']
# Additional settings can be made available to the client side for
# extensibility by specifying them in REST_API_ADDITIONAL_SETTINGS
# !! Please use extreme caution as the settings are transferred via HTTP/S
# and are not encrypted on the browser. This is an experimental API and
# may be deprecated in the future without notice.
#REST_API_ADDITIONAL_SETTINGS = []
# DISALLOW_IFRAME_EMBED can be used to prevent Horizon from being embedded
# within an iframe. Legacy browsers are still vulnerable to a Cross-Frame
# Scripting (XFS) vulnerability, so this option allows extra security hardening
# where iframes are not used in deployment. Default setting is True.
# For more information see:
# http://tinyurl.com/anticlickjack
DISALLOW_IFRAME_EMBED = {{ .Values.conf.horizon.local_settings.config.disallow_iframe_embed }}
STATIC_ROOT = '/var/www/html/horizon'
{{- range $option, $value := .Values.conf.horizon.local_settings.config.raw }}
{{ $option }} = {{ toJson $value }}
{{- end }}
policy:
ceilometer:
context_is_admin: 'role:admin'
context_is_owner: 'user_id:%(target.user_id)s'
context_is_project: 'project_id:%(target.project_id)s'
segregation: 'rule:context_is_admin'
heat:
'actions:action': 'rule:deny_stack_user'
'build_info:build_info': 'rule:deny_stack_user'
'cloudformation:CancelUpdateStack': 'rule:deny_stack_user'
'cloudformation:CreateStack': 'rule:deny_stack_user'
'cloudformation:DeleteStack': 'rule:deny_stack_user'
'cloudformation:DescribeStackEvents': 'rule:deny_stack_user'
'cloudformation:DescribeStackResource': ''
'cloudformation:DescribeStackResources': 'rule:deny_stack_user'
'cloudformation:DescribeStacks': 'rule:deny_stack_user'
'cloudformation:EstimateTemplateCost': 'rule:deny_stack_user'
'cloudformation:GetTemplate': 'rule:deny_stack_user'
'cloudformation:ListStackResources': 'rule:deny_stack_user'
'cloudformation:ListStacks': 'rule:deny_stack_user'
'cloudformation:UpdateStack': 'rule:deny_stack_user'
'cloudformation:ValidateTemplate': 'rule:deny_stack_user'
'cloudwatch:DeleteAlarms': 'rule:deny_stack_user'
'cloudwatch:DescribeAlarmHistory': 'rule:deny_stack_user'
'cloudwatch:DescribeAlarms': 'rule:deny_stack_user'
'cloudwatch:DescribeAlarmsForMetric': 'rule:deny_stack_user'
'cloudwatch:DisableAlarmActions': 'rule:deny_stack_user'
'cloudwatch:EnableAlarmActions': 'rule:deny_stack_user'
'cloudwatch:GetMetricStatistics': 'rule:deny_stack_user'
'cloudwatch:ListMetrics': 'rule:deny_stack_user'
'cloudwatch:PutMetricAlarm': 'rule:deny_stack_user'
'cloudwatch:PutMetricData': ''
'cloudwatch:SetAlarmState': 'rule:deny_stack_user'
context_is_admin: 'role:admin'
deny_everybody: '!'
deny_stack_user: 'not role:heat_stack_user'
'events:index': 'rule:deny_stack_user'
'events:show': 'rule:deny_stack_user'
'resource:index': 'rule:deny_stack_user'
'resource:mark_unhealthy': 'rule:deny_stack_user'
'resource:metadata': ''
'resource:show': 'rule:deny_stack_user'
'resource:signal': ''
'resource_types:OS::Cinder::EncryptedVolumeType': 'rule:context_is_admin'
'resource_types:OS::Cinder::VolumeType': 'rule:context_is_admin'
'resource_types:OS::Manila::ShareType': 'rule:context_is_admin'
'resource_types:OS::Neutron::QoSBandwidthLimitRule': 'rule:context_is_admin'
'resource_types:OS::Neutron::QoSPolicy': 'rule:context_is_admin'
'resource_types:OS::Nova::Flavor': 'rule:context_is_admin'
'resource_types:OS::Nova::HostAggregate': 'rule:context_is_admin'
'service:index': 'rule:context_is_admin'
'software_configs:create': 'rule:deny_stack_user'
'software_configs:delete': 'rule:deny_stack_user'
'software_configs:global_index': 'rule:deny_everybody'
'software_configs:index': 'rule:deny_stack_user'
'software_configs:show': 'rule:deny_stack_user'
'software_deployments:create': 'rule:deny_stack_user'
'software_deployments:delete': 'rule:deny_stack_user'
'software_deployments:index': 'rule:deny_stack_user'
'software_deployments:metadata': ''
'software_deployments:show': 'rule:deny_stack_user'
'software_deployments:update': 'rule:deny_stack_user'
'stacks:abandon': 'rule:deny_stack_user'
'stacks:create': 'rule:deny_stack_user'
'stacks:delete': 'rule:deny_stack_user'
'stacks:delete_snapshot': 'rule:deny_stack_user'
'stacks:detail': 'rule:deny_stack_user'
'stacks:environment': 'rule:deny_stack_user'
'stacks:export': 'rule:deny_stack_user'
'stacks:generate_template': 'rule:deny_stack_user'
'stacks:global_index': 'rule:deny_everybody'
'stacks:index': 'rule:deny_stack_user'
'stacks:list_outputs': 'rule:deny_stack_user'
'stacks:list_resource_types': 'rule:deny_stack_user'
'stacks:list_snapshots': 'rule:deny_stack_user'
'stacks:list_template_functions': 'rule:deny_stack_user'
'stacks:list_template_versions': 'rule:deny_stack_user'
'stacks:lookup': ''
'stacks:preview': 'rule:deny_stack_user'
'stacks:preview_update': 'rule:deny_stack_user'
'stacks:preview_update_patch': 'rule:deny_stack_user'
'stacks:resource_schema': 'rule:deny_stack_user'
'stacks:restore_snapshot': 'rule:deny_stack_user'
'stacks:show': 'rule:deny_stack_user'
'stacks:show_output': 'rule:deny_stack_user'
'stacks:show_snapshot': 'rule:deny_stack_user'
'stacks:snapshot': 'rule:deny_stack_user'
'stacks:template': 'rule:deny_stack_user'
'stacks:update': 'rule:deny_stack_user'
'stacks:update_patch': 'rule:deny_stack_user'
'stacks:validate_template': 'rule:deny_stack_user'
# list of panels to enable for horizon
# this requires that the panels are already installed in the horizon image, if they are not
# nothing will be added
# the name of the panel should be the name of the dir where the panel is installed
# for example heat_dashboard, cloudkittydashboard or neutron_taas_dashboard
extra_panels:
- heat_dashboard
- neutron_taas_dashboard
dependencies:
dynamic:
common:
local_image_registry:
jobs:
- horizon-image-repo-sync
services:
- endpoint: node
service: local_image_registry
static:
dashboard:
jobs:
- horizon-db-sync
services:
- endpoint: internal
service: oslo_cache
- endpoint: internal
service: oslo_db
- endpoint: internal
service: identity
db_drop:
services:
- endpoint: internal
service: oslo_db
db_init:
services:
- endpoint: internal
service: oslo_db
db_sync:
jobs:
- horizon-db-init
services:
- endpoint: internal
service: oslo_db
image_repo_sync:
services:
- endpoint: internal
service: local_image_registry
tests:
services:
- endpoint: internal
service: dashboard
pod:
security_context:
horizon:
pod:
runAsUser: 42424
container:
horizon:
readOnlyRootFilesystem: false
allowPrivilegeEscalation: false
runAsUser: 0
db_sync:
pod:
runAsUser: 42424
container:
horizon_db_sync:
readOnlyRootFilesystem: false
allowPrivilegeEscalation: false
runAsUser: 0
test:
pod:
runAsUser: 42424
container:
horizon_test:
readOnlyRootFilesystem: true
allowPrivilegeEscalation: false
affinity:
anti:
type:
default: preferredDuringSchedulingIgnoredDuringExecution
topologyKey:
default: kubernetes.io/hostname
weight:
default: 10
tolerations:
horizon:
enabled: false
tolerations:
- key: node-role.kubernetes.io/master
operator: Exists
effect: NoSchedule
mounts:
horizon_db_init:
init_container: null
horizon_db_init:
volumeMounts:
volumes:
horizon_db_sync:
init_container: null
horizon_db_sync:
volumeMounts:
volumes:
horizon:
init_container: null
horizon:
volumeMounts:
volumes:
horizon_tests:
init_container: null
horizon_tests:
volumeMounts:
volumes:
replicas:
server: 1
lifecycle:
upgrades:
deployments:
revision_history: 3
pod_replacement_strategy: RollingUpdate
rolling_update:
max_unavailable: 1
max_surge: 3
disruption_budget:
horizon:
min_available: 0
termination_grace_period:
horizon:
timeout: 30
resources:
enabled: false
server:
requests:
memory: "128Mi"
cpu: "100m"
limits:
memory: "1024Mi"
cpu: "2000m"
jobs:
db_init:
requests:
memory: "128Mi"
cpu: "100m"
limits:
memory: "1024Mi"
cpu: "2000m"
db_sync:
requests:
memory: "128Mi"
cpu: "100m"
limits:
memory: "1024Mi"
cpu: "2000m"
db_drop:
requests:
memory: "128Mi"
cpu: "100m"
limits:
memory: "1024Mi"
cpu: "2000m"
image_repo_sync:
requests:
memory: "128Mi"
cpu: "100m"
limits:
memory: "1024Mi"
cpu: "2000m"
tests:
requests:
memory: "128Mi"
cpu: "100m"
limits:
memory: "1024Mi"
cpu: "2000m"
# Names of secrets used by bootstrap and environmental checks
secrets:
identity:
admin: horizon-keystone-admin
oslo_db:
admin: horizon-db-admin
horizon: horizon-db-user
tls:
dashboard:
dashboard:
public: horizon-tls-public
internal: horizon-tls-web
oci_image_registry:
horizon: horizon-oci-image-registry
tls:
identity: false
# typically overridden by environmental
# values, but should include all endpoints
# required by this chart
endpoints:
cluster_domain_suffix: cluster.local
local_image_registry:
name: docker-registry
namespace: docker-registry
hosts:
default: localhost
internal: docker-registry
node: localhost
host_fqdn_override:
default: null
port:
registry:
node: 5000
oci_image_registry:
name: oci-image-registry
namespace: oci-image-registry
auth:
enabled: false
horizon:
username: horizon
password: password
hosts:
default: localhost
host_fqdn_override:
default: null
port:
registry:
default: null
identity:
name: keystone
auth:
admin:
region_name: RegionOne
username: admin
password: password
project_name: admin
user_domain_name: default
project_domain_name: default
hosts:
default: keystone
internal: keystone-api
host_fqdn_override:
default: null
path:
default: /v3
scheme:
default: http
port:
api:
default: 80
internal: 5000
oslo_cache:
hosts:
default: memcached
host_fqdn_override:
default: null
port:
memcache:
default: 11211
dashboard:
name: horizon
hosts:
default: horizon-int
public: horizon
host_fqdn_override:
default: null
# NOTE(portdirect): this chart supports TLS for fqdn over-ridden public
# endpoints using the following format:
# public:
# host: null
# tls:
# crt: null
# key: null
path:
default: null
scheme:
default: http
port:
web:
default: 80
oslo_db:
auth:
admin:
username: root
password: password
secret:
tls:
internal: mariadb-tls-direct
horizon:
username: horizon
password: password
hosts:
default: mariadb
host_fqdn_override:
default: null
path: /horizon
scheme: mysql+pymysql
port:
mysql:
default: 3306
# NOTE(tp6510): these endpoints allow for things like DNS lookups and ingress
# They are using to enable the Egress K8s network policy.
kube_dns:
namespace: kube-system
name: kubernetes-dns
hosts:
default: kube-dns
host_fqdn_override:
default: null
path:
default: null
scheme: http
port:
dns:
default: 53
protocol: UDP
ingress:
namespace: null
name: ingress
hosts:
default: ingress
port:
ingress:
default: 80
network_policy:
horizon:
ingress:
- {}
egress:
- {}
# NOTE(helm_hook): helm_hook might break for helm2 binary.
# set helm3_hook: false when using the helm2 binary.
helm3_hook: true
manifests:
certificates: false
configmap_bin: true
configmap_etc: true
configmap_logo: false
deployment: true
ingress_api: true
job_db_init: true
job_db_sync: true
job_db_drop: false
job_image_repo_sync: true
pdb: true
pod_helm_test: true
network_policy: false
secret_db: true
secret_ingress_tls: true
secret_keystone: true
secret_registry: true
service_ingress: true
service: true
...