Hongbin Lu cafbea5e92 Consolidate devstack config into sample

There are sample local.conf in multiple locations. It is better
to consolidate them into one location to ensure consistency.

Change-Id: I3bfe6a32daeab6ca427173e3e3f96354d622b991

2017-11-24 02:33:24 +00:00

4.8 KiB

Raw Blame History

Developer Quick-Start

This is a quick walkthrough to get you started developing code for Zun. This assumes you are already familiar with submitting code reviews to an OpenStack project.

https://docs.openstack.org/infra/manual/developers.html

Exercising the Services Using Devstack

This session has been tested on Ubuntu 16.04 (Xenial) only.

Clone devstack:

# Create a root directory for devstack if needed
$ sudo mkdir -p /opt/stack
$ sudo chown $USER /opt/stack

$ git clone https://git.openstack.org/openstack-dev/devstack /opt/stack/devstack

We will run devstack with minimal local.conf settings required to enable required OpenStack services:

$ HOST_IP=<your ip>
$ git clone https://git.openstack.org/openstack/zun /opt/stack/zun
$ cat /opt/stack/zun/devstack/local.conf.sample \
    | sed "s/HOST_IP=.*/HOST_IP=$HOST_IP/" \
    > /opt/stack/devstack/local.conf

More devstack configuration information can be found at Devstack Configuration

More neutron configuration information can be found at Devstack Neutron Configuration

Run devstack:

$ cd /opt/stack/devstack
$ ./stack.sh

Prepare your session to be able to use the various openstack clients including nova, neutron, and glance. Create a new shell, and source the devstack openrc script:

$ source /opt/stack/devstack/openrc admin admin

Using the service

We will create and run a container that pings the address 8.8.8.8 four times:

$ zun run --name test cirros ping -c 4 8.8.8.8

You should see a similar output to:

$ zun list
  +--------------------------------------+------+--------+---------+------------+------------+-------+
  | uuid                                 | name | image  | status  | task_state | addresses  | ports |
  +--------------------------------------+------+--------+---------+------------+------------+-------+
  | 46dd001b-7474-412c-a0f4-7adc047aaedf | test | cirros | Stopped | None       | 172.17.0.2 | []    |
  +--------------------------------------+------+--------+---------+------------+------------+-------+

$ zun logs test
  PING 8.8.8.8 (8.8.8.8): 56 data bytes
  64 bytes from 8.8.8.8: seq=0 ttl=40 time=25.513 ms
  64 bytes from 8.8.8.8: seq=1 ttl=40 time=25.348 ms
  64 bytes from 8.8.8.8: seq=2 ttl=40 time=25.226 ms
  64 bytes from 8.8.8.8: seq=3 ttl=40 time=25.275 ms

  --- 8.8.8.8 ping statistics ---
  4 packets transmitted, 4 packets received, 0% packet loss
  round-trip min/avg/max = 25.226/25.340/25.513 ms

Delete the container:

$ zun delete test

Enable the second zun host

Refer to the Multi-Node lab for more information.

On the second host, clone devstack:

# Create a root directory for devstack if needed
$ sudo mkdir -p /opt/stack
$ sudo chown $USER /opt/stack

$ git clone https://git.openstack.org/openstack-dev/devstack /opt/stack/devstack

The second host will only need zun-compute service along with kuryr-libnetwork support. You also need to tell devstack where the SERVICE_HOST is:

$ SERVICE_HOST=<controller's ip>
$ HOST_IP=<your ip>
$ git clone https://git.openstack.org/openstack/zun /opt/stack/zun
$ cat /opt/stack/zun/devstack/local.conf.subnode.sample \
    | sed "s/HOST_IP=.*/HOST_IP=$HOST_IP/" \
    | sed "s/SERVICE_HOST=.*/SERVICE_HOST=$SERVICE_HOST/" \
    > /opt/stack/devstack/local.conf

Note

In multi-node scenario, kuryr-libnetwork config capability_scope must be global (By default it is local), change in file /etc/kuryr/kuryr.conf (all nodes): capability_scope = global